2V0-41.24
Free trial
Verified
Question 1
What is the VMware recommended way to deploy a virtual NSX Edge Node?
- A: Through the NSX UI
- B: Through automated or interactive mode using an ISO
- C: Through the vSphere Web Client
- D: Through the OVF command line tool
Question 2
What is VMware’s recommendation for the minimum MTU requirements when planning an NSX deployment?
- A: MTU should be set to 1700 or greater across the data center network including inter-data center connections.
- B: MTU should be set to 1500 or less only on inter-data center connections.
- C: Configure Path MTU Discovery and rely on fragmentation.
- D: MTU should be set to 1550 or less across the data center network including inter-data center connections.
Question 3
In which VPN type are the Virtual Tunnel interfaces (VTI) used?
- A: SSL-based VPN
- B: Route & SSL based VPNs
- C: Policy & Route based VPNs
- D: Route-based VPN
Question 4
In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)
- A: Configure ECMP on the Tier-0 gateway.
- B: Configure a Tier-1 gateway and connect it directly to the physical routers.
- C: Deploy Large size Edge node/s.
- D: Configure NAT on the Tier-0 gateway.
- E: Add an additional vNIC to the NSX Edge node.
Question 5
A company security policy requires all users to log into applications using a centralized authentication system.
Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)
- A: RSA SecureID
- B: SecureDAP
- C: RADII 2.0
- D: LDAP and OpenLDAP based on Active Directory (AD)
- E: Keygen Enterprise
Question 6
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A: FABRIC
- B: SYSTEM
- C: GROUPING
- D: MONITORING
Question 7
An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.
Which failover detection protocol must be used to meet this requirement?
- A: Host Standby Router Protocol (HSRP)
- B: Beacon Probing (BP)
- C: Virtual Router Redundancy Protocol (VRRP)
- D: Bidirectional Forwarding Detection (BFD)
Question 8
An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful.
What type of network boundary does this represent?
- A: Layer 2 bridge
- B: Layer 2 broadcast domain
- C: Layer 2 VPN
- D: Layer 3 route
Question 9
What are two supported host switch modes? (Choose two.)
- A: Overlay Datapath
- B: Secure Datapath
- C: Standard Datapath
- D: Enhanced Datapath
- E: DPDK Datapath
Question 10
Which is an advantage of an L2 VPN in an NSX 4.x environment?
- A: Achieve better performance
- B: Use the same broadcast domain
- C: Enables Multi-Cloud solutions
- D: Enables VM mobility with re-IP
Question 11
Which two steps must an NSX administrator take to integrate VMware Identity Manager in NSX to support role-based access control? (Choose two.)
- A: Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
- B: Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
- C: Enter the Identity Provider (IdP) metadata URL in NSX Manager.
- D: Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.
- E: Create an OAuth 2.0 client in VMware Identity Manager.
Question 12
Which three selections are capabilities of Network Topology? (Choose three.)
- A: Display how the different NSX components are interconnected.
- B: Display the VMs connected to Segments.
- C: Display how the Physical components are interconnected.
- D: Display the uplinks configured on the Tier-1 Gateways.
- E: Display the uplinks configured on the Tier-0 Gateways.
Question 13
Which of the two following characteristics about NAT64 are true? (Choose two.)
- A: NAT64 requires the Tier-1 gateway to be configured in active-active mode.
- B: NAT64 is stateless and requires gateways to be deployed in active-standby mode.
- C: NAT64 is supported on Tier-0 and Tier-1 gateways.
- D: NAT64 is supported on Tier-1 gateways only.
- E: NAT64 requires the Tier-1 gateway to be configured in active-standby mode.
Question 14
Which VMware GUI tool is used to identify problems in a physical network?
- A: VMware Aria Operations Networks
- B: VMware Aria Automation
- C: VMware Site Recovery Manager
- D: VMware Aria Orchestrator
Question 15
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)
- A: HTTPS
- B: SSH
- C: TCP
- D: UDP
- E: SSL
- F: TLS
Question 16
Where does an administrator configure the VLANs used in VRF Lite? (Choose two.)
- A: uplink interface of the VRF gateway
- B: uplink interface of the default Tier-0 gateway
- C: downlink interface of the default Tier-0 gateway
- D: uplink trunk segment
- E: segment connected to the Tier-1 gateway
Question 17
Which two logical router components span across all transport nodes? (Choose two.)
- A: SERVICE_ROUTER_TIER0
- B: TIER0_DISTRIBUTED_ROUTER
- C: DISTRIBUTED_ROUTER_TIER0
- D: DISTRIBUTED_ROUTER_TIER1
- E: SERVICE_ROUTER_TIER1
That’s the end of your free questions
You’ve reached the preview limit for 2V0-41.24Consider upgrading to gain full access!
Free preview mode
Enjoy the free questions and consider upgrading to gain full access!