2V0-41.23
Free trial
Verified
Question 1
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A: Port Mirroring
- B: IPFIX
- C: Activity Monitoring
- D: Switch Visualization
Question 2
Which VPN type must be configured before enabling a L2VPN?
- A: SSL-based IPSec VPN
- B: Route-based IPSec VPN
- C: Port-based IPSec VPN
- D: Policy-based IPSec VPN
Question 3
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?
- A: get time-server
- B: set timezone
- C: get timezone
- D: set ntp-server
Question 4
An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful.
What type of network boundary does this represent?
- A: Layer 2 VPN
- B: Layer 2 broadcast domain
- C: Layer 2 bridge
- D: Layer 3 route
Question 5
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A: tcpdump
- B: ifconfig
- C: tcpconfig
- D: debug
Question 6
Which two tools are used for centralized logging in VMware NSX? (Choose two.)
- A: VMware Aria Automation
- B: VMware Aria Operations for Logs
- C: Syslog Server
- D: VMware Aria Operations
- E: VMware Aria Operations for Networks
Question 7
An administrator has a requirement to have consistent policy configuration and enforcement across NSX instances.
What feature of NSX fulfills this requirement?
- A: Federation
- B: Policy-driven configuration
- C: Load balancer
- D: Multi-hypervisor support
Question 8
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A: get logical-switch status
- B: get logical-switch status
- C: get logical-switch
- D: get logical-switches
Question 9
When deploying an NSX Edge Transport Node, what two valid IP address assignment options should be specified for the TEP IP addresses? (Choose two.)
- A: Use a Static IP List
- B: Use BootP
- C: Use an IP Pool
- D: Use RADIUS
- E: Use a DHCP Server
Question 10
Which statement is true about an alarm in a Suppressed state?
- A: An alarm can be suppressed for a specific duration in hours.
- B: An alarm can be suppressed for a specific duration in seconds.
- C: An alarm can be suppressed for a specific duration in minutes.
- D: An alarm can be suppressed for a specific duration in days.
Question 11
What can the administrator use to identify overlay segments in an NSX environment if troubleshooting is required?
- A: VNI ID
- B: VLAN ID
- C: Segment ID
- D: Geneve ID
Question 12
Which two built-in VMware tools will help identify the cause of packet loss on VLAN Segments? (Choose two.)
- A: Packet Capture
- B: Live Flow
- C: Traceflow
- D: Flow Monitoring
- E: Activity monitoring
Question 13
What should an NSX administrator check to verify that VMware Identity Manager integration is successful?
- A: From the NSX UI the status of the VMware Identity Manager Integration must be "Enabled".
- B: From VMware Identity Manager the status of the remote access application must be green.
- C: From the NSX UI the URI in the address bar must have "local=false" part of it.
- D: From the NSX CLI the status of the VMware Identity Manager Integration must be "Configured".
Question 14
Which two are requirements for FQDN Analysis? (Choose two.)
- A: The NSX Edge nodes require access to the Internet to download category and reputation definitions.
- B: ESXi control panel requires access to the Internet to download category and reputation definitions.
- C: The NSX Manager requires access to the Internet to download category and reputation definitions.
- D: A layer 7 gateway firewall rule must be configured on the Tier-1 gateway uplink.
- E: A layer 7 gateway firewall rule must be configured on the Tier-0 gateway uplink.
Question 15
What is the VMware recommended way to deploy a virtual NSX Edge Node?
- A: Through the NSX UI
- B: Through automated or interactive mode using an ISO
- C: Through the vSphere Web Client
- D: Through the OVF command line tool
Question 16
An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3-node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI.
What two are the prerequisites for this configuration? (Choose two.)
- A: The cluster configuration must be completed using API.
- B: All nodes must be in separate subnets.
- C: All nodes must be in the same subnet.
- D: A compute manager must be configured.
- E: NSX Manager must reside on a Windows Server.
Question 17
Which CLI command shows syslog on NSX Manager?
- A: show log manager follow
- B: get log-file syslog
- C: /var/log/syslog/syslog.log
- D: get log-file auth.log
Question 18
Which NSX CLI command is used to change the authentication policy for local users?
- A: set auth-policy
- B: set cli-timeout
- C: get auth-policy minimum-password-length
- D: set hardening-policy
Question 19
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN-backed logical switch?
- A: Loopback Router Port
- B: VLAN Uplink
- C: Service interface
- D: Downlink interface
Question 20
What are four NSX built-in role-based access control (RBAC) roles? (Choose four.)
- A: Read
- B: Network Admin
- C: Full Access
- D: Enterprise Admin
- E: LB Operator
- F: Auditor
- G: None
Question 21
Which two of the following are used to configure Distributed Firewall on VDS? (Choose two.)
- A: vCenter API
- B: NSX UI
- C: NSX CLI
- D: vSphere API
- E: NSX API
That’s the end of your free questions
You’ve reached the preview limit for 2V0-41.23Consider upgrading to gain full access!
Free preview mode
Enjoy the free questions and consider upgrading to gain full access!