2V0-41.19Free trialFree trial

By vmware
Aug, 2025

Verified

25Q per page

Question 1

Which two commands are used to query the arp-table of a logical switch? (Choose two.)

  • A: get logical-switch arp-table <logical-switch-uuid>
  • B: get logical-switch <logical-switch-uuid> arp-table
  • C: get logical-switch <vni> arp-table
  • D: get logical-switch arp-table <vni>
  • E: get logical-switch arp-table
—

Question 2

What are the supported N-VDS modes?

  • A: DPDK Datapath
  • B: Enhanced Datapath
  • C: Overlay Datapath
  • D: Standard Datapath
  • E: Secure Datapath
—

Question 3

An organization with two data centers is planning an active-active multi-site deployment of NSX-T Data Center.
The two data centers have this network connectivity configuration:
✑ Redundant 1Gbps links with 200 millisecond RTT
✑ Global load balancing is not being utilized
✑ 1600 MTU
✑ vSphere 6.5U2
Which configuration prevents the use of an active-active architecture?

  • A: vSphere 6.7 is the minimum supported version for active-active on vSphere
  • B: 9000 MTU is required for active-active state replication
  • C: global load-balancing is required to support NSX Manager DNS namespace
  • D: RTT must be under 150 ms
—

Question 4

An NSX administrator has created a segment named WEB-LS from the simplified UI and noticed the segment is not realized on the KVM Transport node.
What are two possible causes for this issue? (Choose two.)

  • A: Since the Compute Manager is disconnected in Simplified UI, the WEB-LS segment will not be realized on the KVM Transport Node.
  • B: The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.
  • C: The virtual machines running on the KVM Transport Node are not connected to the VDS.
  • D: The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.
  • E: The virtual machines running on the KVM transport node are not connected to the WEB-LS Segment.
—

Question 5

Which NSX CLI command will enable the SSH service on the NSX Edge node?

  • A: set service ssh enabled
  • B: start service ssh
  • C: start service ssh start-on-boot
  • D: set service ssh start-on-boot enabled
—

Question 6

An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the Failover Order as a NIC teaming policy.
Which profile allows the administrator to configure the NIC Teaming policy as Failover Order?

  • A: N-VDS Profile
  • B: Uplink Profile
  • C: Host Switch Profile
  • D: Transport Node Profile
—

Question 7

In an enterprise-based single-tier routing topology, which routing component provides east-west routing functionality?

  • A: Tier-0 Gateway
  • B: Edge Node
  • C: Edge Cluster
  • D: Tier-1 Gateway
—

Question 8

An NSX administrator is planning to deploy a multi-tier routing topology in their NSX-T Data Center environment to provide East-West routing for the VMs.
Which routing component must be deployed?

  • A: Tier-0 Gateway
  • B: Edge Cluster
  • C: Tier-1 Gateway
  • D: Edge Node
—

Question 9

Image 1

A NSX-T Data Center administrator wants to ensure that any machine on a public network can communicate with a Web VM running in a NSX-T Data Center environment.
Which NAT type must be created on the Tier-0 or Tier-1 Gateway to achieve this?

  • A: 1:1 NAT
  • B: Reverse NAT
  • C: DNAT
  • D: SNAT
—

Question 10

An NSX administrator created a Segment from the Simplified UI and wants to find the Replication Mode configured on the Segment. Which NSX CLI command lists the Replication mode?

  • A: get logical-switches
  • B: get logical-switch <Logical-Switch-UUID>
  • C: get logical-switch <Local-Switch-UUID> status
  • D: get logical-switch status
—

Question 11

What is the most restrictive NSX-T built-in role which will allow a user to apply configuration changes on a NSX Edge?

  • A: Network Operator
  • B: Network Engineer
  • C: Cloud Service Administrator
  • D: NSX Administrator
—

Question 12

What is the maximum supported ECMP paths in NSX-T 2.4 Data Center?

  • A: 6
  • B: 8
  • C: 9
  • D: 7
—

Question 13

Refer to the exhibit.

Image 1

An administrator is trying to configure a medium load balancer in a production environment, but is getting the error message shown in the exhibit.
Which step must the administrator perform to remediate the problem?

  • A: Reduce the size of the virtual pool.
  • B: Restart the NSX Manager.
  • C: Power-off the existing load balancer and change its size.
  • D: Place the Tier-1 Gateway in a large edge cluster and redeploy the load balancer.
—

Question 14

An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?

  • A: join cluster <NSX-Cluster-IP> username root password <root-password> thumbprint <NSX Manager-thumbprint>
  • B: join management-plane <nsx-manager-ip> username admin password <admin-password> thumbprint <nsx-manager-thumbprint>
  • C: join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint <nsx-manager-thumbprint>
  • D: join management-cluster <NSX-Cluster-IP> username admin password <admin-password> thumbprint <NSX Manager-thumbprint>
—

Question 15

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

  • A: SYSTEM
  • B: FABRIC
  • C: MONITORING
  • D: GROUPING
—

Question 16

What are three NSX Manager roles? (Choose three.)

  • A: zookeeper
  • B: manager
  • C: policy
  • D: controller
  • E: cloud
  • F: master
—

Question 17

When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?

  • A: SR and DR doesn't need to be connected to provide any stateful services.
  • B: SR is instantiated and automatically connected with DR.
  • C: SR and DR is instantiated but requires manual connection.
  • D: DR is instantiated and automatically connected with SR.
—

Question 18

Which three hardware-based offloads provide maximum performance for physical network interface cards? (Choose three.)

  • A: Netfilter Flow Offload (NFO)
  • B: Priority Flow Control (PFC)
  • C: Receive Side Scaling (RSS)
  • D: TCP Segmentation Offload (TSO)
  • E: Source Route Bridging (SRB)
  • F: Large Receive Offload (LRO)
—

That’s the end of your free questions

You’ve reached the preview limit for 2V0-41.19

Consider upgrading to gain full access!

Page 1 of 4 • Questions 1-25 of 89
1234
→

Free preview mode

Enjoy the free questions and consider upgrading to gain full access!