How can you "throttle" SnapValue updates and baseline transfers so that the primary or secondary is not transmitting data as it can?
AUse the -k option in the snapvault start or snapshot modify commands.
BSnapVault does not support throttling of network throughout.
CUse the snapvault throttle command.
DUse the -k option in the snapvault initialize command.
An aggregate is composed of twelve 36-Gigabyte disks. A drive fails and only 72-Gigabyte spare disks are available. Data ONTAP will then perform what action.
AChooses a 72-Gigabyte disk and use it as is.
BChooses a 72-Gigabyte disk and right-size it.
CHalts after 24 hour of running in degraded mode.
DAlerts you that there are no 36-Gigabyte disks and wait for one to be inserted.
Which statement is true about expanding an aggregate from 32-bit to 64-bit in place?
AAll aggregates are automatically converted from 32-bit to 64-bit with the Data ONTAP 8.1 upgrade.
BThe expansion is triggered by an aggr convert command.
CThe expansion is triggered by adding disks to exceed 16 TB.
DThe 32-bit aggregates are degraded and must be Volume SnapMirrored to a new 64-bit aggregates with Data ONTAP 8.1 upgrade.
What utility on the storage system will allow you to capture network packet information?
ASnoop
BNetstats
CPktt
DTraceroute
The root admin on the UNIX box receives an "Access Denied" message when he attempts to access a newly mounted qtree. What’s the most likely cause of this error?
AThe qtree is missing from the /etc/hosts file.
BNFS is turned off on the storage system.
CThe qtree is set to ntfs security style.
DThe qtree has not been exported.
Which two modes support using SnapMirror over multiple network paths?
AStandalone
BPartner
CMulti
DFailover
EGive back
Identify the two commands that could be entered on the SnapMirror destination storage system. (Choose two)
AOptions snapmirror.access on
BOptions snapmirror.resync on
CSnapmirror initialize
DSnap mirror resync
Which two operations can be performed with the SnapDrive for windows graphical user interface?
ACreate volume
BCreate Snapshot copies
CCreate File
DCreate Disk
Which storage system command would display the WWPNs of hosts that have logged into storage system using a Fibre Channel connection?
Afcp config
Bfcp initiator show
Cfcp show –i
Dfcp show initiator
In a Fiber Channel configuration, the host’s HBA is referred to as the ___________, and the storage system’s HBA to as the _____________.
ATarget, initiator
BPrimary, secondary
CInitiator, target
DSecondary, primary
Which action will cause a currently in-sync SnapMirror relationship to fail out of sync?
ARunning snapmirroe update on the source storage system.
BRunning snapmirror release on the source storage system.
CModifying the /etc/snapmirror.conf file for the relationship on the source storage system
DModifying the /etc/snapmirror.conf file for the relationship on the destination storage system.
You are trying to do a single file SnapRestore for a file, but you are receiving an error message that the directory structure no longer exists. Which is the most likely explanation?
AOnce the directory structure has been deleted, you cannot restore the file using single file SnapRestore. You must now SnapRestore the volume.
BSnapshot copies have been created since the original directory structure was deleted.
CYou must recreate the directory structure before trying to restore the file.
DYou cannot restore a file to an alternate location.
Which mechanism allows you to make LUNs available to some initiators and unavailable to others?
ALUN masking
BLUN grouping
CLUN cloning
DLUN hiding
An iSCSI ______________ is established when the host initiator logs into the iSCSI target. Within a ______________ you can have one or more ____________.
Asession, session, connections
Bconnection, session, connections
Cconnection, connection, sessions
Dsession, connection, sessions
Which NetApp Virtual Storage Tier component works at the host level?
AFlash Pool
BFlash Disk
CFlash Accel
DFlash Cache
EFlash IO
When using a Protection Manager policy to manage Open systems SnapValut backups on a UNIX server, which three valid objects to include in the data set?
(Choose three)
AThe entire client
BA directory
CA file
DA qtree
What does it signify if the disks are "not owned" in a FAS2020 system?
AThe disks are mailbox disks.
BThe disks are spare disks.
CThe disks are data disks.
DThe disks are not used.
For each Open Systems platform directory to be backed up to the SnapVault secondary storage system you must execute _____________.
AAn initial baseline copy
BA temporary copy
CAn incremental copy
DA scheduled update copy
What is the maximum distance between a standard clustered pair at 2Bbps?
A100 meters
B10 meters
C50 meters
D500 meters
Which exportfs command will temporally export the resource while ignoring the options specified in the /etc/exports file?
Aexportfs – v <path>
Bexportfs –u <path>
Cexportfs –a <path>
Dexportfs – i <path>
Is NetApp storage Encryption supported in Data ONTAP 8.1.1 Cluster-Mode?
ANo, but you can file a PVR to request support.
BNo. it is targeted for a future release of Data ONATP.
CYes, only with a special license installed.
DYes, it has been supported since 8.0.1.
Which two cp types would indicate a busy storage system? (Choose two).
Acp_from_log_full
Bcp_from_busy
Ccp_from_cp
Dcp_from_timer
There are three phases of Non Disruptive Volume Movement (NDVM). What is the correct sequence of these phases?
ASetup Phase, Mirror Phase, Cutover Phase
BInitialization phase, Copy Phase, Migrate Phase
CBegin Phase, Move Phase, Complete Phase
DSetup Phase, Data Copy Phase, Cutover Phase
Which statement describes the results of the SnapMirror resynce command?
AResynchronization finds the newest common snapshot shared by the two volumes or qtree, and removes all newer information on the storage system on which the command is run.
BResynchronization will cause the loss of all data written to the destination after the original base snapshot was made.
CResynchronization will update the snapshot on the destination filer.
DResynchronization will update the snapshot on the source filer.
If you were troubleshooting and wanted to look at SnapMirror log files, what is the path to these files?