MB-240Preview

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You are configuring Dynamics 365 Field Service to create an option to see only a specific set of resources on the schedule board. As part of the system setup, all Resources have been assigned to a territory. You want to create the option to see only resources that are in Washington territory.

Solution: You filter the Territories in the Filter section of Filter and Map View.

Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You are configuring Dynamics 365 Field Service to create an option to see only a specific set of resources on the schedule board. As part of the system setup, all Resources have been assigned to a territory. You want to create the option to see only resources that are in Washington territory.

Solution: You highlight the Washington Territory in the Map View of the Filter and Map View section.

Does this meet the goal?

Your company is currently using a fixed duration for a job type while scheduling work orders. This causes cascading delays, resulting in lower utilization of the resources.

To address this issue, you propose the use of predictive work duration (powered by AI) to help provide more realistic durations.

You need to advise the management team on the factors dispatchers can use to predict the duration of any given booking or requirement.

Which three factors can be used? Each correct answer presents a complete solution.

NOTE: Each correct selection is worth one point.

You are a dispatcher for Dynamics 365 Field Service. You schedule a resource to a work order using the schedule board.

The resource appears available, but informs you they put in a Time Off Request for that period.

Which two options are potential reasons why the resource appears available, but informs you they are not available? Each answer represents a complete solution.

DRAG DROP

You are a Dynamics 365 system functional consultant for a telecommunication firm.

You must configure and enable Agreements to ensure that work orders are automatically generated for customers who have contracted for that service, and that invoices are being sent at the correct intervals to the customers.

Which functions of the system support this requirement? To answer, drag the appropriate function to the appropriate scenario. Each function may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view the content.

NOTE: Each correct selection is worth one point.

You are a Microsoft Dynamics 365 Field Service dispatcher. A customer's work order has a particular characteristic and time requirement that is different from most other work orders.

You need to be shown the most suitable resources, and manually book the one that matches the customer’s requirements.

What should you do?

You recently created a new schedule board tab.

You need to ensure that only a subset of users can view this new tab.

Which two actions should you perform? Each correct answer presents part of the solution.

NOTE: Each correct selection is worth one point.

DRAG DROP

Your customer is offering a new service that requires two resources.

You need to ensure that the right resource requirements are created, so that the technician with the right skill set will be assigned.

What are the first three steps you should perform in sequence? To answer, move the appropriate actions from the list of steps to the answer area and arrange them in the correct order.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You are working with your customer to define their schedule board.

Your customer needs you to add or create additional views for their scheduling team.

Solution: Edit the Schedule Board Settings, and update the Requirements Panel to include the new or existing view.

Does this meet the goal?

Contoso, Ltd has just acquired a new company in order to increase the services it offers to its customers. Contoso, Ltd. wants to ensure that it is able to track all of the stages in its service management workflow, including the services offered by the new service company.
You need to configure Dynamics 365 CE for Field Services to ensure that all of the necessary status values are configured correctly to track your company's unique business process.
Which action must you perform?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You are working with your customer to define their schedule board.

Your customer needs you to add or create additional views for their scheduling team.

Solution: Create a new view in the Resource Requirements Views. Edit the Scheduler Settings, and add the new view.

Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You are working with your customer to define their schedule board.

Your customer needs you to add or create additional views for their scheduling team.

Solution: Create a new view in the Bookable Resource Bookings Views. Then, edit or create a new tab on the schedule board, and update the Requirements Panel with the new view.

Does this meet the goal?

Your organization wants to use the new Microsoft Dynamics 365 Field Service mobile app. You need to install this app for the technicians.

In order to run the initial tests, you install the mobile app and connect with the Sandbox environment to verify that everything is working as expected.

Now, you want to connect the mobile app to the Production environment.

Which two actions should you take? Each correct answer presents a part of the solution.

NOTE: Each correct selection is worth one point.

DRAG DROP

You are a technician at Contoso Electronic, using the Microsoft Dynamics 365 Field Service mobile app to track and manage service requests and inventory.

Your supervisor asks you to explain how Field Service keeps track of inventory based on the quantities at the warehouse.

To answer, drag the appropriate type of quantity at the warehouse to the explanation of the quantity. Each type of quantity will be used once. You may need to drag the split bar between panes or scroll to view the content.

NOTE: Each correct selection is worth one point.

You are implementing Microsoft Dynamics 365 Field Service.

The customer wants to use the system to capture changes in various system readings when a technician is onsite servicing an asset.

What should you recommend?

You need to configure the Microsoft Dynamics 365 Field Service mobile app to provide field technicians with access to custom entities.

What should you do?

DRAG DROP

Your customer wants to enable their Microsoft Dynamics 365 Field Service mobile app for offline use.

You need to configure the mobile app for technicians, including custom entity offline usage.

What are the first four steps you should perform in sequence? To answer, move the appropriate actions from the list of steps to the answer area and arrange them in the correct order.

You are configuring work orders for technicians to complete the onsite service.

When a work order is completed, the customer needs to receive an invoice for the labor charge time spent by the technician to complete the service.

Which option should the technician use to enter their time spent?

As a new start-up field services company, you are looking to streamline your customer service process to provide the best customer service experience.
Your company has decided to implement Dynamics Field Services as the foundation for its customer service management processes.
You need to ensure that the cases that the customer service team creates can be quickly and efficiently converted to work orders (that will minimize the need to add additional information to the work orders) using the out-of-the-box capabilities.
Which key item do you need to configure before the customer service agents will be able to convert a case to a work order?

You are managing a Microsoft Dynamics 365 Field Service implementation with model-driven apps for each workstream. Users are reporting that they see all workstream model-driven apps when they log into Dynamics 365, even though only a single workstream is relevant to their work.

You need to configure the model-driven apps to ensure users can only see the single model-driven app relevant to their work.

What should you do?

Your customer recently implemented Return Merchandise Authorization (RMA).

Your customer wants to streamline the return process. When items are returned to the warehouse, the returned item should be scanned with a mobile device when it is received. This is the only function to be performed by the RMA Receipts user.

What is your recommendation for the most efficient solution?

DRAG DROP

You are a Dynamics 365 Field Service functional consultant.

Your organization has recently implemented Connected Field Service (CFS) for Azure IoT Hub. Your organization is using Smart Thermostats to monitor the readings of their cold storage facilities and have registered them as IoT Devices.

If the reading (in Fahrenheit) on the IoT device exceeds 70 degrees, an IoT Alert is generated in CFS.

You need to achieve the following using workflow:

1. If the device reading (in Fahrenheit) is between 70 degrees and 85 degrees, have CFS automatically send a command to remotely reset the device.
2. If the device reading (in Fahrenheit) is greater than 85 degrees, have CFS automatically create a case.

Which three steps should you take in sequence? To answer, move the appropriate actions from the list of steps to the answer area and arrange them in the correct order.

A functional consultant needs to enable Internet of Things (IoT) access.

Which two actions need to be taken? Each answer presents a complete solution.