MB-335Free trial

DRAG DROP

A company is implementing Dynamics 365 Supply Chain Management. The company is a subcontractor that produces subassemblies for two major customers, CustomerA and CustomerB.

The company prioritizes CustomerA production orders to start on Mondays. The production orders may take several days to complete. CustomerB orders are produced throughout the week, after CustomerA orders are completed. Work in process (WIP) must be calculated and consolidated for CustomerA and CustomerB respectively on the financial reports.

You need to configure the production requirements.

What should you configure? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

NOTE: Each correct selection is worth one point.

You are the lead product design manager at a Process manufacturing plant.

A formula that produces egg yolks as a by-product. This by-product is added back into inventory at standard cost and can be used in other production batches.

You need to select the by-product cost allocation.

Which cost allocation type should you use?

HOTSPOT

A company that assembles packaging material uses Dynamics 365 Supply Chain Management.

The glue that is used in assembly has run out of stock and will not be back in stock as expected. Another adhesive must be substituted for the glue. This will affect orders in planning as well as production orders that have started.

You need to ensure that the substitute adhesive is used in production until the glue is back in stock.

Which configuration should you use for each requirement? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

HOTSPOT

A company implements Dynamics 365 Supply Chain Management.

You need to ensure that cost roll-ups and sales price calculations are configured for the scenario.

Which options should you use? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

DRAG DROP

A company uses Process manufacturing.

Employees work a half day so that they can attend a company event. You have a rush order that must be completed that same day.

After reviewing the net requirements of the batch order, only 400 of the total quantity of 1400 units must be completed today. The production manager must retain the original batch number as the quantity of 400. The original batch number must appear on documentation for the customer.

You need to split the batch order into two orders.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

DRAG DROP

A company uses Asset management in Dynamics 365 Supply Chain Management. The company also uses Dynamics 365 Guides independently of the Dynamics 365 Supply Chain Management implementation.

Maintenance workers require a checklist template to complete work orders. A solution must help the workers through work order steps. The solution must use Dynamics 365 Guides with Dynamics 365 Supply Chain Management.

You need to integrate the solution.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

DRAG DROP

A company uses the asset management module in Dynamics 365 Supply Chain Management.

A machine on the shop floor is noisy and emitting an odd smell. The shop floor manager must alert the repair team that the asset might require a repair, or a series of repairs, by one or more specialized repair technicians. All repair records must tie back to the initial investigation record in case of a safety audit.

You need to create components to initiate the process of tracking the requests.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

HOTSPOT

A company uses Dynamics 365 Supply Chain Management.

The company wants to use the distributed hybrid topology model to alleviate performance issues at some of its distribution centers. The company has a manufacturing plant, PlantA, which resides at the same physical location as the company home office in Frankfurt, Germany.

The company has the following distribution locations:

• Distribution1 covers Scotland.
• Distribution2 covers Ireland.
• Distribution3 covers the United Kingdom.
• Distribution4 covers Belgium, Germany, and the Netherlands.
• Distribution5 covers the Shetland Islands.

All distribution warehouses use Dynamics 365 Supply Chain Management to receive and distribute goods from PlantA.

Warehouse personnel use the warehouse app to perform their job functions. Because of their proximity to each other, Distribution1, 2, and 3 are managed together and frequently transfer goods between each location.

Due to several connection issues with Dynamics 365 Supply Chain Management, the Shetland Islands location struggles to perform tasks.

The company must maintain as little of its own IT infrastructure as possible, especially in remote areas, but still support daily activities at all locations.

You need to recommend the appropriate topology configuration.

Which type of scaled unit should you use? To answer, select the appropriate options in the answer area.

A company uses Dynamics 365 Supply Chain Management for Process manufacturing.

You are reviewing the planned production orders for the next two weeks. There are several production orders for the same product. One order is scheduled to run the week after another order.

You need to optimize the planned production orders.

What should you do?

Case Study -
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.

To start the case study -
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.

Background -
A manufacturing company produces custom configured-to-order motorcycles. The company plans to implement Dynamics 365 Supply Chain Management. The company contains one legal entity located in Missouri where all production and warehousing operations occur.

Customization options -
The custom motorcycles have a variety of selections that can be selected in the listed order by the end customer, including the following:

Current environment -

Customization restrictions -
The following restrictions on customizations are in place:
Green color can only be sold with the Legend Trim.
Orange color can be sold with the Sport or Legend Trim.
The ML seat must be included in the Legend package.
The MS seat must be included in the Sport package.

Manufacturing facilities -
The company includes the following manufacturing groups: Assembly and Plastic Molding. The Assembly group is responsible for assembling the motorcycles with purchased and manufactured goods. The Plastic Molding group is responsible for manufacture of all plastic parts used in the assembly area.

Motorcycle manufacturing -
The parts for the product assembly are picked from the warehouse and staged at the correct workstation by a warehouse operator for each production order.

Plastic manufacturing -
Plastic parts are molded using dyes that create multiple parts at once. The parts are machined in the same production process to remove excess plastic and add additional holes for assembly. Excess plastic is recycled back into the feedstock of the same color plastic chips for use in the molding process.

Metal parts -
Raw metal parts are purchased fully machined but without primer or paint. The parts are subcontracted to a vendor for primer and paint based upon the color requirements.

Facility -
The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line
Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.

Requirements -

Sales orders -
The company has the following requirements for sales order:
During the configuration of a sales order, invalid combinations must be prevented.
Each configuration must create a unique bill of material (BOM) and Route based on options selected.
Sales pricing for the sales order must be based upon options selected.
Due to emissions regulations, the motorcycles cannot be sold to the state of California.

Motorcycle manufacturing -
The company has the following requirements for motorcycle manufacturing:
Schedule labor only at the labor pool level without machines by day.
Produce motorcycles within a scheduled day in any order.
Record actual production labor with start/stop times.
Record manager approval of labor entered prior to posting.
Post actual material consumption after production is finished.

Plastic manufacturing -
The company has the following requirements for motorcycle manufacturing
Schedule both labor and machines.
Adjust schedules by using a Gantt chart.
Backflush standard labor by operation.
Post actual material consumption at the start of production.
Track and allocate costs to the excess plastic.
Report multiple molded part numbers during the same production run.
Determine the correct mold to use on a production order.
Generate a batch number for each production order.

Metal parts -
The company has the following requirements for metal parts manufacturing:
Schedule shipments to the vendor for painting.
Receive painted parts into inventory from the vendor.
Track vendor inventory levels.

Defaults -
You must configure defaults for manufacturing execution production orders to meet the following requirements:
Ensure accuracy for production order pick list posting.
Ensure correct pick list creation.

Issues -
In the current system, the company cannot calculate overhead rates and determine the breakdown of material, labor, machine, and overhead costs for production.
The company is manually calculating an 8% overhead on materials and posting a journal manually.
You need to set up the state control for sales of motorcycles.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A manufacturing company uses time and attendance in Dynamics 365 Supply Chain Management.

Break times are paid. The cost of a break time must be charged at the pay rate of the job in progress when the break starts.

You need to configure the break times to charge against the job in progress.

Which two actions should you perform? Each answer presents a partial solution.

NOTE: Each correct selection is worth one point.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. IngredientA is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.

You need to ensure that the system is set up to support the manufacturing process.

Solution: Create a formula version for each concentration level.

Does the solution meet the goal?