AZ-303Free trial

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You manage an Active Directory domain named contoso.local.
You install Azure AD Connect and connect to an Azure Active Directory (Azure AD) tenant named contoso.com without syncing any accounts.
You need to ensure that only users who have a UPN suffix of contoso.com in the contoso.local domain sync to Azure AD.
Solution: You use the Synchronization Service Manager to modify the Metaverse Designer tab.
Does this meet the goal?

...Show comments

—

HOTSPOT -
You have an Azure subscription that contains a resource group named RG1.
You have a group named Group1 that is assigned the Contributor role for RG1.
You need to enhance security for the virtual machines in RG1 to meet the following requirements:
✑ Prevent Group1 from assigning external IP addresses to the virtual machines.
✑ Ensure that Group1 can establish a Remote Desktop connection to the virtual machines through a shared external IP address.
What should you use to meet each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

...Show comments

—

You create a container image named Image1 on a developer workstation.
You plan to create an Azure Web App for Containers named WebAppContainer that will use Image1.
You need to upload Image1 to Azure. The solution must ensure that WebAppContainer can use Image1.
To which storage type should you upload Image1?

...Show comments

—

You have an Azure Service Bus and two clients named Client1 and Client2.
You create a Service Bus queue named Queue1 as shown in the exhibit. (Click the Exhibit tab.)

Client1 send messages to Queue1 as shown in the following table.

Client2 reads the messages from Queue1 at 12:01:05.
How will the messages be presented to Client2?

...Show comments

—

You have an Azure Cosmos DB account named Account1. Account1 includes a database named DB1 that contains a container named Container1. The partition key for Container1 is set to /city.
You plan to change the partition key for Container1.
What should you do first?

...Show comments

—

HOTSPOT -
You have an Azure subscription that contains the Azure SQL servers shown in the following table.

The subscription contains the elastic pools shown in the following table.

The subscription contains the Azure SQL databases shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

...Show comments

—

HOTSPOT -
You have an Azure subscription that contains the storage accounts shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

...Show comments

—

You have an Azure subscription named Subscription1 that is used by several departments at your company. Subscription1 contains the resources in the following table.

Another administrator deploys a virtual machine named VM1 and an Azure Storage account named storage2 by using a single Azure Resource Manager template.
You need to view the template used for the deployment.
From the Azure Portal, for which blade can you view the template that was used for the deployment?

...Show comments

—

HOTSPOT -
Your network contains an Active Directory domain named adatum.com and an Azure Active Directory (Azure AD) tenant named adatum.onmicrosoft.com.
Adatum.com contains the user accounts in the following table.

Adatum.onmicrosoft.com contains the user accounts in the following table.

You need to implement Azure AD Connect. The solution must follow the principle of least privilege.
Which user accounts should you use in Adatum.com and Adatum.onmicrosoft.com to implement Azure AD Connect? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

...Show comments

—

You have an Azure subscription that contains a resource group named RG1. RG1 contains multiple resources.
You need to trigger an alert when the resources in RG1 consume $1,000 USD.
What should you do?

...Show comments

—

HOTSPOT -
You create a virtual machine scale set named Scale1. Scale1 is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

...Show comments

—

You plan to automate the deployment of a virtual machine scale set that uses the Windows Server 2016 Datacenter image.
You need to ensure that when the scale set virtual machines are provisioned, they have web server components installed.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

...Show comments

—

HOTSPOT -
You have several Azure virtual machines on a virtual network named VNet1. Vnet1 has two subnets that have 10.2.0.0/24 and 10.2.9.0/24 address spaces.
You configure an Azure Storage account as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

...Show comments

—

HOTSPOT -
You create and save an Azure Resource Manager template named Template1 that includes the following four sections.
Section1.

Section2.

Section3.

Section4.

You deploy Template1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

...Show comments

—

DRAG DROP -
You have virtual machines (VMs) that run a mission-critical application.
You need to ensure that the VMs never experience down time.
What should you recommend? To answer, drag the appropriate solutions to the correct scenarios. Each solution may be used once, more than once, or not at all.
You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point
Select and Place:

...Show comments

—

You have an Azure subscription.
You have an on-premises virtual machine named VM1. The settings for VM1 are shown in the exhibit. (Click the Exhibit tab.)

You need to ensure that you can use the disks attached to VM1 as a template for Azure virtual machines.
What should you modify on VM1?

...Show comments

—

Your company has an office in Seattle.
You have an Azure subscription that contains a virtual network named VNET1.
You create a site-to-site VPN between the Seattle office and VNET1.
VNET1 contains the subnets shown in the following table.

You need to route all Internet-bound traffic from Subnet1 to the Seattle office.
What should you create?

...Show comments

—

HOTSPOT -
You have Azure Storage accounts as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

...Show comments

—

You create an Azure virtual machine named VM1 in a resource group named RG1.
You discover that VM1 performs slower than expected.
You need to capture a network trace on VM1.
What should you do?

...Show comments

—

You have an Azure subscription that contains 100 virtual machines.
You have a set of Pester tests in PowerShell that validate the virtual machine environment.
You need to run the tests whenever there is an operating system update on the virtual machines. The solution must minimize implementation time and recurring costs.
Which three resources should you use to implement the tests? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

...Show comments

—

You have an Azure subscription named Subscription1 that contains an Azure virtual network named VNet1. VNet1 connects to your on-premises network by using
Azure ExpressRoute.
You need to connect VNet1 to the on-premises network by using a site-to-site VPN. The solution must minimize cost.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

...Show comments

—

Your network contains an on-premises Active Directory domain named contoso.com. The domain contains the users shown in the following table.

You plan to install Azure AD Connect and enable SSO.
You need to specify which user to use to enable SSO. The solution must use the principle of least privilege.
Which user should you specify?

...Show comments

—

HOTSPOT -
You have an Azure subscription that contains the resource groups shown in the following table.

RG1 contains the virtual machines shown in the following table.

RG2 contains the virtual machines shown in the following table.

All the virtual machines are configured to use premium disks and are accessible from the Internet.
VM1 and VM2 are in an availability set named AVSET1. VM3 and VM4 are in the same availability zone. VM5 and VM6 are in different availability zones.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

...Show comments

—

A company plans to use third-party application software to perform complex data analysis processes. The software will use up to 500 identical virtual machines
(VMs) based on an Azure Marketplace VM image.
You need to design the infrastructure for the third-party application server. The solution must meet the following requirements:
✑ The number of VMs that are running at any given point in time must change when the user workload changes.
✑ When a new version of the application is available in Azure Marketplace it must be deployed without causing application downtime.
✑ Use VM scale sets.
✑ Minimize the need for ongoing maintenance.
Which two technologies should you recommend? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

...Show comments

—

You have a resource group named RG1 that contains the following:
✑ A virtual network that contains two subnets named Subnet1 and AzureFirewallSubnet
✑ An Azure Storage account named contososa1
✑ An Azure firewall deployed to AzureFirewallSubnet
You need to ensure that contososa1 is accessible from Subnet1 over the Azure backbone network.
What should you do?

...Show comments

—