WLAN planning has requirements on signal field strength in coverage areas. For example, the signal field strength in key areas ranges from -40 dBm to -75 dBm, and that in common areas exceeds -85 dBm.
An antenna converts pilot waves on transmission lines into electromagnetic waves propagated in unbounded media (free space in most cases), or vice versa.
ATrue
BFalse
OFDMA and MU-MIMO are mutually exclusive technologies that cannot be configured together.
ATrue
BFalse
On a WLAN where there are only one AP and two STAs, the two STAs can hear each other but one STA is not in the coverage area of the AP. For the AP, this STA is a hidden node.
ATrue
BFalse
Which of the following profiles can be associated with an AP group? (Choose all that apply.)
ASSID profile
BVAP profile
CSecurity profile
DRegulatory domain profile
Question 6
AI Overview
0
Question 7
AI Overview
Question 8
AI Overview
Question 9
AI Overview
Question 10
AI Overview
Question 11
Comprehensive AI Experiment
Question 12
Comprehensive AI Experiment
Question 13
AI Overview
Question 14
AI Overview
Question 15
AI Overview
Question 16
AI Overview
Question 17
AI Overview
Question 18
AI Overview
Question 19
AI Overview
Question 20
AI Overview
Question 21
AI Overview
Question 22
AI Overview
Question 23
AI Overview
Question 24
AI Overview
Question 25
AI Overview
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ad
Want a break from the ads?
Become a Supporter and enjoy a completely ad-free experience, plus unlock Learn Mode, Exam Mode, AstroTutor AI, and more.
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Which of the following statements about the Fat AP architecture is true?
AA Fat AP must work with an AC.
BFat APs are applicable to medium and large sized enterprises because they are easy to manage and maintain.
CFat APs support automatic radio calibration, load balancing, and Layer 3 roaming.
DA Fat AP can implement user access, as well as encrypt and forward service data.
Which of the following statements about AC VRRP HSB are true? (Choose all that apply.)
AThe active/standby mode is supported.
BLoad balancing mode is supported.
CUser data is backed up in real time.
DConfiguration synchronization is supported.
An office houses 150 2.4 GHz users with a user concurrency rate of 60%. It is required that the bandwidth per capita be 2 Mbps on the downlink and 1 Mbps on the uplink. Assuming that 20 users are connected to each AP and interference is not taken into account, at least how many APs must be deployed to meet capacity requirements?
A2
B3
C4
D5
Which of the following statements about the ESS is true?
AESSs are basic WLAN units.
BThe ESS identifies an AP.
CBSSs in an ESS can have different SSIDs.
DThe ESS is composed of BSSs as basic units and is a method of expanding the BSS range.
Which of the following statements about CAPWAP functions is false?
AIt enables APs to discover an AC.
BIt maintains the connectivity state between the AC and APs.B. It enables APs to exchange data sent by STAs with the AC through CAPWAP tunnels when the direct forwarding mode is used.
CIt enables the AC to manage APs and deliver service configurations to them.
Which of the following commands are typically used to test network connectivity? (Choose all that apply.)
Adisplay
Breset
Cping
Dtracert
An engineer receives a customer complaint about poor wireless network experience in a room.
The engineer suspects that severe channel interference exists, and runs the display radio all command to check radio information about the AP in the room. Which of the following statements are true according to the display radio all command output? (Choose all that apply.)
AThe AP ID is 1.
BThe AP model is AP1.
CThe AP supports both 2.4 GHz and 5 GHz radios.
DThe AP does not support 802.11n.
Which of the following factors affect the theoretical Wi-Fi rate? (Choose all that apply.)
ACCA threshold
BSpatial stream
CCoding rate
DSymbol length
EGI length
FNumber of valid subcarriers
Which of the following statements about ISM frequency bands are true? (Choose all that apply.)
AISM frequency bands are reserved for international, scientific, and medical (ISM) purposes.
BISM frequency bands lower WLAN costs but bring a lot of co channel interference.
CNo license or fee is required for using ISM frequency bands.
DThe 2.4 GHz and 5 GHz frequency bands used by WLAN both belong to ISM frequency bands.
Which of the following statements are true about 802.1X authentication? (Choose all that apply.)
A802.1X authentication is implemented based on a client/server architecture.
B802.1X authentication is applicable to large enterprise networks.
C802.1X authentication involves three authentication entities: requester (terminal), authenticator (WLAN device), and authentication server (RADIUS).
DPSK authentication is more secure than 802.1X authentication.
In an inter AC roaming scenario, which of the following statements about the AC's mobility group are false? (Choose all that apply.)
ASTAs can roam only between ACs in the same mobility group.
BACs in the same mobility group encapsulate and transmit roaming information over the DTLS extended tunnel.
CThe mobility server must be an AC in the local mobility group.
DA mobility server needs to be specified for member ACs in a mobility group.
The following displays online information and type information about an AP. Assume that the AP fails to provide the WLAN service due to an unexpected fault. An engineer intends to restart the AP to restore the WLAN service. Which of the following commands can be used to restart the AP? (Choose all that apply.)
Aap-reset ap-id 115
Bap-reset ap-group default
Cap-reset all
Dap-reset ap-type type-id 0
The following figure shows the hardware structure of an AirEngine 8760-X1 -PRO. Which of the following statements about components of the AirEngine 8760-X1-PRO are true? (Choose all that apply.)
A4: DC power input
B8: IoT slots
C1: Anti-theft lock hole
D6: Reset button
In direct forwarding mode, user data packets are encapsulated in a CAPWAP tunnel and then forwarded by the AC to the upper-layer network.
ATrue
BFalse
The management VILAN is used to transmit packets that are forwarded through CAPWAP tunnels, including management packets and service data packets forwarded through CAPWAP tunnels.
ATrue
BFalse
WLAN technology uses radio waves to transmit information over the air and uses the 2.4 GHz and 5 GHz frequency bands. The 5 GHz frequency band here refers to Fifth Generation (5G) technology.
ATrue
BFalse
Which of the following items does not need to be checked if an AP fails to obtain an IP address through DHCP?
AWhether the link between the AP and AC is properly connected.
BWhether the uplink port of the AP is correctly configured.
CWhether the CAPWAP tunnel configuration between the AP and AC is correct.
DWhether a management VLAN is configured for the AP and AC.
Which of the following configurations can be used to correctly implement MAC address authentication over APs that attempt to go online?
A[AC6508-wlan-view]ap-auth mode mac-auth
B[AC6508-wlan-view]ap auth-mode mac-auth
C[AC6S08]ap auth mode mac-auth
D[AC6508]ap auth-mode mac-auth
Which of the following 802.11 fames is used to receive data packers by a STA working, in power-saving mode?
ARTS
BCTS
CACK
DPS-Poll
Which of the following statements about carriers is false?
AA carrier is an electromagnetic wave that is modulated to transmit a signal, and its waveform is typically a sine wave.
BCarrier signals can be produced by modulating the three components (frequency bandwidth, frequency, and phase) of electromagnetic waves.
CCarriers are the physical basis and bearer tool for transmitting voice and data information.
DThe receiver end needs to parse carrier signals to obtain data.