QuestionQ37

VerifiedSwitching

A global cruise-line company must modernize its current fleet. To be cost-effective and improve sustainability, it will refresh the ship’s internal infrastructure and replace all WLAN/LAN hardware. During this refresh, the company will retain its existing security requirements. The CIO also wants to minimize unused switch ports, and any future expansion will always involve a hardware refresh. The work starts with the smallest ship, which accommodates a maximum of 800 guests.

Each ship has a LAN infrastructure with two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are in the ship’s MDF, and the distribution switches are in the IDFs. Every cabin and technical room receives one individual access switch.

The ship’s cabling infrastructure will remain unchanged. Each IDF connects to the MDF using SMF, with two pairs available for the interconnect between core and distribution. The MDF-to-IDF SM fiber is under 300 meters (980 ft) and is OS1. Each cabin connects to its IDF through a single OM2 pair, with a maximum distance of 60 meters (200 ft). Each technical room connects to its IDF using a single OM2 pair, with distances from 100 to 150 meters (320 to 500 ft).

For every cabin and technical room, the customer plans to replace the current fan-less 2530/2540 switches without changing the requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to support increased network traffic, and technical rooms require redundant power.

The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. It uses 200/300-series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no change in WLAN requirements.

The cruise-line company will replace its existing Internet connection before the LAN/WLAN refresh. The new Internet connection will offer 99.8% uptime, needed to keep the paid quest Wi-Fi operational. With this new Internet connection, the CIO wants the design to use Aruba’s ESP architecture because the Internet connection is guaranteed.

Based on best practices and the customer requirements, what is the correct LAN approach?

Explanation

An Aruba ESP EVPN-VXLAN design uses the routed underlay to provide switch-to-switch transport and management reachability, while user VLANs are implemented as overlay segments. Keeping the management VLAN in the underlay preserves direct infrastructure management independent of the user overlay; placing user VLANs in the overlay provides the fabric abstraction and segmentation model used by ESP.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!