QuestionQ38

VerifiedWLAN

A global cruise-line company needs to refresh its existing fleet. They will refresh the ship’s ‘insides’ to be cost-effective and improve sustainability. They will replace the ship’s complete WLAN/LAN hardware. During this refresh, the company will not change its current security requirements. The CIO also wants to minimize the number of unused switch ports. Any future expansion will always require a hardware refresh. They begin with the smallest ship, supporting a maximum of 800 guests.

Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are located in the ship’s MDF, and the distribution switches are located in the IDFs. Each cabin and technical room receives one individual access switch.

The ship’s cabling structure will not be refreshed. Each IDF connects to the MDF using SMF, with two pairs available for the interconnect between core and distribution. The SM fiber length between MDF and IDF is under 300 meters (980 ft), and it is OS1. Each cabin connects to the IDF through one OM2 pair, with a maximum length of 60 meters (200 ft). Each technical room connects to the IDF through one OM2 pair, with lengths from 100 to 150 meters (320 to 500 ft).

For every cabin/technical room, the customer wants to replace its current fan-less 2530/2540 without changing requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and technical rooms require redundant power.

The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. Their WLAN infrastructure uses 200/300 series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no changes to WLAN requirements.

The cruise-line company will replace its current internet connection before the LAN/WLAN refresh. The new internet connection will provide 99.8% uptime, needed to ensure the paid guest Wi-Fi remains operational. With this new internet connection, the CIO wants to base the design on Aruba’s ESP architecture because the internet connection is guaranteed.

Based on best practices, what optic type should be recommended for the connection between the IDF and the cabins?

Explanation

A 10GBASE-SR SFP+ optic is appropriate for the 60-meter cabin links because they use OM2 multimode fiber, and SR supports 10 GbE over OM2 for roughly 80 meters. LRM is designed for longer OM2 runs up to 220 meters and is not needed for these short links. Aruba’s transceiver documentation identifies the SR optic as a 300 m multimode option and the LRM optic as a 220 m OM2 option.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!