QuestionQ36

VerifiedSecurity

A global cruise-line company needs to refresh its current fleet. It will refresh the ship’s “insides” to be cost-effective and improve sustainability. The company will replace all WLAN/LAN hardware on the ship. During this refresh, it will not change its current security requirements. The CIO also wants to minimize the number of unused switch ports. Any future expansion will always require a hardware refresh. The company begins with the smallest ship, which has a maximum of 800 guests.

Each ship has a LAN infrastructure with two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are in the ship’s MDF, and the distribution switches are in the IDFs. Each cabin and technical room receives one individual access switch.

The ship’s cabling structure will not be refreshed. Each IDF connects to the MDF by SMF, with two pairs available for the interconnect between core and distribution. The SM fiber length between the MDF and IDF is under 300 meters (980 ft), and the fiber type is OS1. Each cabin connects to the IDF through a single OM2 pair, with a maximum length of 60 meters (200 ft). Each technical room connects to the IDF by a single OM2 pair, with lengths from 100 to 150 meters (320 to 500 ft).

For every cabin/technical room, the customer wants to replace the existing fan-less 2530/2540 switches without changing the requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and technical rooms require redundant power.

The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. Its WLAN infrastructure uses 200/300-series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no changes to WLAN requirements.

The cruise-line company will replace its existing Internet connection before the LAN/WLAN refresh. The new Internet connection will offer 99.8% uptime, needed to keep paid guest Wi-Fi operating continuously. Because this Internet connection is guaranteed, the CIO wants the design based on Aruba’s ESP architecture.

One week after presenting the design to the CIO, the CIO calls to discuss increasing security on the wired network infrastructure. Because a competitor had a cruise ship compromised by a cyberattack, the CSO has mandated stronger wired-network security. They have heard about dynamic segmentation and central and decentral overlay networks. For POS systems, they require a low-latency network connection between the POS system and the POS server in the onboard data center.

What solution meets the customer’s requirements?

Explanation

Aruba Central NetConductor supports the CX 6300 as a fabric edge switch, the CX 8325 as a route reflector, and the CX 8360 as an edge, stub, or border switch. CX 6300 satisfies the edge requirement while allowing redundant power for the technical-room switches and 10GbE fiber uplinks. NetConductor supplies the segmentation and overlay capabilities required for increased wired security; no WLAN gateway is necessary when the unchanged WLAN remains on InstantOS. The Aruba Central NetConductor support matrix documents these platform-to-persona assignments.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!