QuestionQ20
VerifiedSwitchingA global cruise-line company must modernize its existing fleet. To control costs and improve sustainability, it will refresh the ship’s internal systems and replace all WLAN/LAN hardware. This refresh will not change the current security requirements. The CIO also wants to minimize unused switch ports. Any future expansion will always involve a hardware refresh. The project begins with the smallest ship, supporting a maximum of 800 guests.
Each ship’s LAN consists of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are in the ship’s MDF, while the distribution switches are in the IDFs. Every cabin and technical room receives one access switch.
The ship’s cabling will not be replaced. Each IDF connects to the MDF using SMF, with two pairs available for the core-to-distribution interconnect. The MDF-to-IDF SM fiber is OS1 and is less than 300 meters (980 ft). Each cabin connects to the IDF through a single OM2 pair, at a maximum distance of 60 meters (200 ft). Each technical room connects to the IDF through a single OM2 pair, with distances from 100 to 150 meters (320 to 500 ft).
For every cabin and technical room, the customer wants to replace its current fanless 2530/2540 switches without changing requirements, except that the distribution-switch uplink must be upgraded to 10GbE for increased network traffic, and technical rooms require redundant power.
The WLAN will be refreshed 1:1, with no new cabling or AP locations. It uses 200/300 Series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no WLAN requirement changes.
The cruise-line company will replace its current Internet connection before the LAN/WLAN refresh. The new connection will offer 99.8% uptime, needed to keep paid guest Wi-Fi operational. Because this Internet connection is guaranteed, the CIO wants the design based on Aruba ESP architecture.
Based on best practices, which switch model is the most cost-effective recommendation for the cabins?
Community Discussion