QuestionQ19

VerifiedSecurity

A global cruise-line company must modernize its existing fleet. It will refresh the ship’s ‘insides’ to reduce cost and improve sustainability, including replacement of all WLAN/LAN hardware. This refresh will not change the company’s existing security requirements. The CIO also wants to minimize unused switch ports. Any future expansion will require another hardware refresh. The company begins with its smallest ship, which accommodates a maximum of 800 guests.

Each ship has a LAN infrastructure comprising two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are in the ship’s MDF, while the distribution switches are in its IDFs. Every cabin and technical room receives one access switch.

The ship’s cabling infrastructure will not be replaced. Each IDF connects to the MDF over SMF, with two pairs available for the core-to-distribution interconnect. The MDF-to-IDF SMF distance is under 300 meters (980 ft), and the fiber type is OS1. Each cabin connects to its IDF over one OM2 pair, with a maximum length of 60 meters (200 ft). Each technical room connects to its IDF over one OM2 pair, at lengths from 100 to 150 meters (320 to 500 ft).

For every cabin and technical room, the customer wants to replace the current fan-less 2530/2540 switches without altering the requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to support increased network traffic, and technical rooms require redundant power.

The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. The WLAN uses 200/300-series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no WLAN-requirement changes.

The cruise-line company will replace its existing internet connection before the LAN/WLAN refresh. The new internet connection will provide 99.8% uptime, which is necessary to keep the paid quest Wi-Fi operational. Because this internet connection is guaranteed, the CIO wants the design based on Aruba ESP architecture.

One week after you present the design to the CIO, the CIO calls to discuss increasing security for the wired network infrastructure. After a competitor’s cruise ship was cyber hacked, the CSO has mandated stronger wired-network security. They have heard about dynamic segmentation and centralized and decentralized overlay networks. The POS systems require a low-latency network connection between each POS system and the POS server in the ship’s data center. The CSO also wants to strengthen WLAN security by tunneling all user traffic.

What solution meets the customer’s requirements?

Explanation

HPE Aruba Networking Central NetConductor provides a policy-based EVPN-VXLAN overlay for dynamic segmentation, and a distributed overlay can enforce policy while allowing local forwarding for latency-sensitive POS traffic. CX 6300 switches provide the required 10GbE access uplinks and can use modular, redundant power supplies. The NetConductor support matrix assigns the CX 8325 to the Route Reflector role and the CX 8360 to aggregation-stub and border roles; the CX 8320 is not supported for fabric roles. A 9240 gateway provides tunnel orchestration and terminates AP tunnels, satisfying the requirement to tunnel WLAN user traffic.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!