QuestionQ18
VerifiedSecurityA global cruise line company must refresh its current fleet. To control costs and improve sustainability, it will refresh the ship’s “insides,” including replacement of all WLAN/LAN hardware. During this refresh, the company will retain its existing security requirements. The CIO also wants to minimize unused switch ports. Any future expansion will always require a hardware refresh. The project begins with the smallest ship, accommodating a maximum of 800 guests.
Each ship has a LAN infrastructure comprising two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are installed in the ship’s MDF, and the distribution switches are installed in the IDFs. Every cabin and technical room receives one individual access switch.
The ship’s cabling infrastructure will not be refreshed. Each IDF connects to the MDF using SMF, with two pairs available for the core-to-distribution interconnect. The MDF-to-IDF SMF run is under 300 meters (980 ft), and it uses OS1 fiber. Each cabin connects to the IDF with one OM2 pair, with a maximum distance of 60 meters (200 ft). Each technical room connects to the IDF with one OM2 pair, with distances from 100 to 150 meters (320 to 500 ft).
For every cabin/technical room, the customer wants to replace its current fan-less 2530/2540 switches without changing the requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and technical rooms require redundant power.
The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. The WLAN uses 200/300 series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no WLAN requirement changes.
The cruise line company will replace its existing Internet connection before the LAN/WLAN refresh. The new Internet connection will deliver 99.8% uptime, needed to keep paid guest Wi-Fi operational. With this new Internet connection, the CIO wants to base the design on Aruba’s ESP architecture because the Internet connection is guaranteed.
The week after presenting the design to the CIO of the cruise line company, the CIO calls to discuss increasing security for the wired network infrastructure. Because a competitor had one of its cruise ships cyber hacked, the CSO has mandated greater wired-network security. They have heard about dynamic segmentation and central and decentral overlay networks.
What would you recommend as the most cost-efficient solution?
Community Discussion