Which two statements about the Cisco TCS are correct? (Choose two.)
AIt contains an internal gatekeeper
BIt allows creators to edit videos
CIt runs on the Windows operating system
DIt runs on the Linux operating system
What are two ways to set the IP network information on the Cisco TCS? (Choose two.)
ADHCP
Bstatically set on its Windows operating system
Cstatically set on its Linux operating system
Dautomatically assigned by the Cisco TelePresence Management Server
What is the effect of registering the Cisco TCS with the Cisco VCS using H.323 gateway mode?
AThe Cisco TCS does not support this type of registration
BAn unlimited number of recording aliases can be assigned
CThe Cisco TCS is prevented from making an outbound call to a Cisco MCU.
DThe Cisco TCS can traverse calls between SIP and H.323
Which two statements about Cisco TCS recording aliases are true? (Choose two.)
ASystem recording aliases can only be dialed by the site manager (administrator)
BAny recording alias can be triggered by dialing its assigned URI or E.164 number
CRecordings resulting from a personal recording alias can only be managed by their creator
DFinal recordings made from a recording alias cannot be modified
Question 6
Control, data, and management plane design
0
Question 7
Control, data, and management plane design
Question 8
Automation and Programmability
Question 9
Automation and Programmability
Question 10
Control, data, and management plane design
Question 11
Control, data, and management plane design
Question 12
Control, data, and management plane design
Question 13
Automation and Programmability
Question 14
Network Design
Question 15
Network Design
Question 16
Control, data, and management plane design
Question 17
Control, data, and management plane design
Question 18
Automation and Programmability
Question 19
Network Design
Question 20
Business Strategy Design
Question 21
Control, data, and management plane design
Question 22
Control, data, and management plane design
Question 23
Control, data, and management plane design
Question 24
Control, data, and management plane design
Question 25
Network Design
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ad
Want a break from the ads?
Become a Supporter and enjoy a completely ad-free experience, plus unlock Learn Mode, Exam Mode, AstroTutor AI, and more.
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Which of these constitutes a Cisco TCS recording alias?
Aa recording template, a media server configuration, and a call configuration
Ba media server configuration and a call configuration
Ca recording template and a media server configuration
Da recording template and a call configuration
Which two statements about Cisco TCS users are true? (Choose two.)
AUsers with the creator role can create their own recording aliases
BLocal users have only limited Cisco TCS permissions
CUsers can be assigned to the Cisco TCS through an Active Directory LDAP server
DUser permissions are based on one of three assignable roles
Which two statements about Cisco TCS recording templates are true? (Choose two.)
AEvery recording alias contains one recording template
BThey provide a way to produce recordings without a recording alias
CThey must always contain a media server configuration
DThere can only be one system recording template
Which statement about playing back Cisco TCS recordings is true?
AIt is not possible to play back Cisco TCS recordings from a video endpoint
BThe Cisco TCS must register to the Cisco VCS as an H.323 gateway in order to play back recordings on video endpoints
CThe Cisco TCS will automatically assign an E.164 playback number to recordings if it is registered as an H.323 terminal
DThe Cisco TCS must register to the Cisco VCS using SIP in order to play back on any video endpoint
In which two locations can Cisco TCS recordings be viewed? (Choose two.)
Adirectly on the Cisco TCS web portal
Bin the Cisco TelePresence Management Server
Con a video endpoint
Don the Codec C90 touch panel
Which two pieces of troubleshooting information does the Cisco TCS provide? (Choose two.)
Alog messages that can be accessed by the site manager through the CLI
Brecording alias processing progress
Cerror logs that only Cisco TAC can access
Dlog messages that can be accessed by the site manager through the web interface
Which two of these can be found by navigating to TCS Diagnostic > Server Overview in the Cisco TCS web interface? (Choose two.)
Aoption key information
Brecording port activity status
CCisco VCS registration status
Dwhich Cisco TMS is managing the TCS
Cisco TCS recordings can be encoded into which two video formats? (Choose two.)
AMPEG-4 for Flash and QuickTime
BWMV
CH.262
DSorensen VP8 for Flash
You have configured your Cisco TelePresence Codec C90 but discover unwanted noise during use. What best practice will help avoid this problem?
AConnect only one device at a time to an input and avoid daisy-chaining.
BRecycle the power on your system after adding each additional input
CIf you are not using an input, turn it off.
DDaisy-chain additional devices using a serial cable to provide separate power supplies
Refer to the exhibit. Which two letters represent input connections on the Cisco TelePresence Codec C90? (Choose two.)
Exhibit:
AA
BB
CC
DD
EE
You want to reconfigure the H.323 and SIP settings using the remote control on the Cisco TelePresence Codec C90. Which menu allows you to do this?
AAudio input levels
BIP settings
CAdvanced configuration
DProtocol configuration
What do you need to do before an endpoint can place or receive H.323 calls using a URI address?
ARegister the endpoint to the SIP server
BRegister the endpoints to the gatekeeper
CRegister the endpoint to the gateway
DRegister the endpoint to the Cisco TelePresence MCU
While on a call, using the remote control, how do you add an additional participant to a call on your MultiSite-enabled endpoint?
APress the Home button to return to the menu, and select the Add Participant button
BPress and hold the End Call key to bring up the dialing menu.
CPress and hold the Call key to bring up the dialing menu.
DPress the Call key, and choose or dial the number of the additional participant.
Refer to the exhibit. You are installing a high-definition (720p or 1080p) monitor on the Cisco TelePresence Codec C90. Which of the outputs that are represented by letters in the exhibit should you use?
Exhibit:
AA or B
BA or D
CA or E
DB or C
ED or E
Which three are true statements regarding the Cisco TelePresence endpoint product set? (Choose three.)
AThe MX200 and MX300 are all-inclusive systems and do not require additional AV components.
BThe MX200 and MX300 are integrator codec systems and require additional AV components
CThe EX60 and EX90 are room-based TelePresence systems intended for use in board rooms
DThe C90 is a high end integrator codec
EThe EX90 is an integrator codec.
FThe C40 is a basic integrator codec supporting dual monitors
What are the two methods for pairing an 8-inch Cisco TelePresence Touch panel to a Codec C90? (Choose two.)
APlug the cable that is attached to the Touch panel directly into the back of the Codec C90
BPlug the provided Ethernet cable from the Touch panel power supply into the second Ethernet port on the Codec C90
CPlug the provided Ethernet cable from the Touch panel power supply into the LAN and pair over the network
DUse the built-in wireless on the Touch panel to pair over the network
Which statement is true regarding passwords on a Cisco TelePresence MX, EX, C Series, or SX20 device?
AThe device ships from factory with the admin account enabled, with no password
BThe device ships from factory with the admin account enabled, with a default password of CISCO
CThe device ships from factory with the admin account enabled, with a default password of TANDBERG
DThe device ships from factory with the root account enabled, with no password
When configuring a Cisco TelePresence EX, MX, or C Series device, which two statements are true? (Choose two.)
AThe unit can be completely configured from the web interface
BIf available, the TRC5 remote control can be used to completely configure the unit
CThe API must be used in order to configure the unit
DThe Touch panel can be used to completely configure the unit
If the user purchases the Cisco TelePresence Touch panel, which two statements are true? (Choose two.)
ABoth the TRC5 remote control and the Touch panel can be used simultaneously
BEither the TRC5 remote control or the Touch panel can be used, but not both simultaneously
CThe Touch panel should be used to make calls, but the TRC5 remote control should be used to configure the unit
DThe web interface can be used to configure the unit
If you do not have the Premium Resolution option installed on a Cisco TelePresence endpoint, what is the maximum resolution that you can transmit and receive?