300-075
Free trial
Verified
Question 1
Refer to the exhibit.
If an IP phone in San Jose roams to New York, which two IP phone settings will be modified by Device Mobility so that the phone can place and receive calls in
New York? (Choose two.)
- A: The physical locations are not different, so the configuration of the phone is not modified.
- B: The physical locations are different, so the roaming-sensitive parameters of the roaming device pool are applied.
- C: The device mobility groups are the same, so the Device Mobility-related settings are applied in addition to the roaming-sensitive parameters.
- D: The Device Mobility information is associated with one or more device pools other than the home device pool of the phone, so one of the associated device pools is chosen based on a round-robin load-sharing algorithm.
- E: The Device Mobility information is associated with the home device pool of the phone, so the phone is considered to be in its home location. Device Mobility will reconfigure the roaming-sensitive settings of the phone. BC
Question 2
In Cisco Unified Communications Manager, where do you configure the default bit rate for audio and video devices?
- A: Enterprise Parameters
- B: Region under Region Information
- C: Cisco CallManager service under Service Parameter Configuration
- D: Enterprise Phone Configuration
Question 3
What is the default DSCP/PHB for TelePresence video conferencing packets in Cisco Unified Communications Manager?
- A: EF/46
- B: CS6/48
- C: AF41/34
- D: CS3/24
- E: CS4/32
Question 4
A voice engineer is enabling video capabilities between H.323 and SIP endpoints. Which component allows for standardized caller addresses between the endpoints?
- A: search rules
- B: SIP route pattern
- C: policy service
- D: transform
Question 5
An administrator is setting up analog phones that connect to a Cisco VG310. Which type of gateway or trunk on Cisco Unified Communication Manager for the
Cisco VG310 must the administrator set up to allow the phones to have the call pickup feature?
- A: H.323 gateway
- B: SCCP gateway
- C: H.225 trunk
- D: MGCP gateway
- E: SIP trunk
Question 6
An engineer must enable video desktop sharing between a Cisco Unified Communications Manager registered video endpoint and a Cisco VCS registered video endpoint. Which protocol must be enabled in SIP profile for VCS SIP trunk on Cisco Unified Communications Manager?
- A: RDP
- B: H.264
- C: H.224
- D: H.263
- E: BFCP
Question 7
An engineer is configuring a SIP profile for Cisco VCS SIP trunk on Cisco Unified Communications Manager and enables the option "Use Fully Qualified Domain
Name" in SIP Requests. Which result is achieved by enabling this option?
- A: Resolve FQDN using DNS type SRV record.
- B: Resolve FQDN using DNS type A record.
- C: Ensure FQDN is used in SIP Identity header.
- D: Ensure FQDN is used in SIP Request header.
Question 8
Which two options are functionalities of subzones in a Cisco VCS deployment? (Choose two.)
- A: Resolve names outside of the direct control of the Cisco VCS that exist on the public Internet.
- B: Connect to another Cisco VCS on the same side of the firewall to extend dialing capabilities.
- C: Traverse a firewall from a protected network to a public or DMZ network.
- D: Apply registration, authentication, and media encryption policies.
- E: Manage bandwidth to restrict standard definition endpoints from using more than 2 Mb of bandwidth.
Question 9
Which two options should be used to create a secure traversal zone between the Expressway-C and Expressway-E? (Choose two.)
- A: Expressway-C and Expressway-E must trust each other's server certificate.
- B: One Cisco Unified Communications traversal zone for H.323 and SIP connections.
- C: A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.
- D: Enable username and password authentication verification on Expressway-E.
- E: Create a set of username and password on each of the Expressway-C and Expressway-E to authenticate the neighboring peer.
Question 10
A presales engineer is working on a quote for a major customer and must evaluate how many Cisco VCS Expressway traversal call licenses for which to plan.
Calls to and from which three routes must the engineer include in the tally? (Choose three.)
- A: gateway
- B: Cisco 9971 Endpoint
- C: border controllers
- D: gatekeeper
- E: SIP trunk
- F: VCS
Question 11
You have deployed a Cisco 2821 ISR to perform as an SRST voice gateway at a remote site. During a network failure between the remote site and the central office, some of the phones located at the remote site are unable to make phone calls. Which two options are potential causes of the problem? (Choose two.)
- A: The site has exceeded the number of SRST endpoints supported by the voice gateway.
- B: The ccm-manager fallback command is configured incorrectly on the voice gateway.
- C: Phones at the remote site are assigned to the incorrect device pool.
- D: The ccm-manager fallback-mgcp command is configured incorrectly on the voice gateway.
- E: The site has exceeded the number of simultaneous calls allowed in SRST mode.
Question 12
Which two commands, one of which can be used to verify Cisco IP phone sip registration, and one of which can be used to verify Cisco IP phone sccp registration on Cisco Unified Communications Manger Express? (Choose two.)
- A: show telephony-service ephone-dn
- B: show voice register session-server
- C: show ephone registered
- D: show ccm-manager hosts
- E: show sip-ua status registrar
Question 13
Refer to the exhibit.
An engineer is deploying a new Cisco VCS Expressway for a company and has configured the IP address and the system name. After logging into the Cisco VCS
Expressway admin page, the engineer sees this output. Which four options must be configured to complete the Cisco VCS Expressway system configuration?
(Choose four.)
- A: NTP server
- B: SIP server
- C: LDAP server
- D: security certificate
- E: DHCP server
- F: DNS server
- G: SIP URI
- H: Cisco Unified Communications Manager IP address
Question 14
Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure?
- A: SRST without MGCP fallback
- B: SRST with VoIP dial peers to Cisco Unified Communications Manager Express
- C: SRST with MGCP fallback
- D: Cisco Unified Communications Manager Express in SRST mode
Question 15
Which three configuration settings are included in a default region configuration? (Choose three.)
- A: Immersive Bandwidth
- B: Video Call Bandwidth
- C: Audio Codec
- D: Link Loss Type
- E: Real Time Protocol
- F: Location Description
Question 16
What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence endpoints?
- A: CS3 (24)
- B: EF (46)
- C: AF41 (34)
- D: CS4 (32)
Question 17
Refer to the exhibit. An engineer is troubleshooting a Cisco VCS Control call-routing issue. What happens when ccnpcollab is dialed?
- A: The call is routed as ccnpcollab.
- B: The call is not routed.
- C: The call is routed to cisco.com as ccnpcollab
- D: The call is routed as ccnpcollab@cisco.com
Question 18
Refer to the exhibit.
An engineer receives a ticket to troubleshoot a one-way audio issue with these symptoms:
✑ User A can hear user and vice versa.
✑ User A can hear user C, however user cannot hear user A.
✑ User can heat user C, however user cannot hear user .
Which two properties are the most likely reasons for this issue? (Choose two.)
- A: The Cisco VCS Expressway is not responding to the SIP INVITE coming from the Cisco VCS Control.
- B: The NAT device is allowing only RTP/RTCP ports from the DMZ to the internal network.
- C: The router does not have a route back from the DMZ to the internal network.
- D: The Cisco EX60 of user С is not responding to requests coming from the TMS server.
- E: The Cisco EX60 default gateway of user С is missing from the network configuration.
That’s the end of your free questions
You’ve reached the preview limit for 300-075Consider upgrading to gain full access!
Free preview mode
Enjoy the free questions and consider upgrading to gain full access!