QuestionQ88

VerifiedTroubleshoot

You have an HPE Aruba Networking CX 8325-48Y8C Switch with storage arrays connected through 3 m SFP28-to-SFP28 DAC cables on ports 1/1/1–1/1/4, and they are operating correctly. Your customer reports that an iLO NIC server interface is connected through a 1G Base-T transceiver on port 1/1/12 but does not establish a link, although the server is running. The customer also observes that the port LED is flashing amber.

How will you resolve this connectivity issue?

Explanation

The 48 SFP28 ports of the CX 8325-48Y8C sit in three rows, and the third row holds the port numbers that are multiples of three (3, 6, 9, 12, 15, ...). The 1G RJ45 transceiver (J8177D) is supported only in the top two rows, with at most 32 per switch, so it cannot link in port 1/1/12. Ports 1/1/9 and 1/1/15 are also third-row ports, so moving the cable to either of them does not help. The SFP28 ports also form 12-port interface groups (ports 1/1/1-1/1/12 are group 1) that default to 25G, and every port in a group runs at the group's speed. Setting group 1 to 10g with system interface-group 1 speed 10g disables the mismatched 25G DAC storage links on 1/1/1-1/1/4, and port 1/1/12 still could not take the RJ45 module. The fix that keeps the storage links up is to connect the 1G iLO interface to a switch with native 1 Gbps ports. An out-of-band management switch is the right place for iLO management traffic.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!