QuestionQ56
VerifiedSwitchingA global cruise-line company needs to refresh its current fleet. To be cost-effective and increase sustainability, it will refresh the ship’s “insides” and replace all WLAN/LAN hardware. During this refresh, the company will not change its current security requirements. The CIO also wants to minimize the number of unused switch ports. Any future expansion will always require a hardware refresh. The work starts with the smallest ship, which accommodates a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are in the ship’s MDF, and the distribution switches are in the IDFs. Every cabin and technical room receives one access switch.
The ship’s cabling structure will not be refreshed. Each IDF connects to the MDF by SMF, with two pairs available for the core-to-distribution interconnect. The SM fiber between an MDF and IDF is less than 300 meters (980 ft) long and is OS1. Each cabin connects to its IDF using a single OM2 pair, with a maximum length of 60 meters (200 ft). Each technical room connects to its IDF using a single OM2 pair, with lengths from 100 to 150 meters (320 to 500 ft).
For every cabin/technical room, the customer wants to replace its existing fan-less 2530/2540 switches without changing requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and the technical rooms require redundant power.
The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. It uses 200/300-series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no changes to WLAN requirements.
The cruise-line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide 99.8% uptime, needed to keep paid guest Wi-Fi operational. Because this Internet connection is guaranteed, the CIO wants to base the design on Aruba’s ESP architecture.
Based on best practices, what is the recommended most cost-effective switch model for the technical rooms?
Community Discussion