QuestionQ12

VerifiedSwitching

‘Don't Buy at Us’ is a US-based retail company expanding into Europe, including EMEA through a regional headquarters, HQ2, in The Netherlands.

Its US headquarters, HQ1, was refreshed last year using the HPE Aruba Networking ESP architecture. You have designed HQ2 using the same two-tier design as HQ1. The high-level design is shown below.

Question Image

Switch BOM for this two-tier project:

  • Collapsed Core: 2 x 8360-16Y2C in VSX (ISL 2x100GbE DAC)
  • Access Stack: 10 x Stack of 6200F 48G Class4 PoE 4SFP+ 740W (each stack has 4 members, VSF with 10GbE VSF links) (2 x 10GbE uplink per stack)

During the design presentation to the CTO of ‘Don't Buy at Us,’ you were informed of the updated fiber infrastructure installed in HQ2.

Question Image

The core stack is installed in the MDF, and one access stack is installed in each IDF. Based on best practice, what is the most cost-effective update to the switch BOM?

Explanation

Six access stacks connect over OM2, OM3, or OM4 multimode fiber and each has two 10GbE uplinks, requiring 12 10G SR transceivers. The OM2 runs are no longer than 71 m, which is within Aruba 10G SR reach on OM2, while the OM3 and OM4 runs are also within their supported SR distances. Four access stacks connect over OS1 single-mode fiber and require 8 10G LR transceivers for their two uplinks. Retaining the specified 6200F Class 4 PoE access switches avoids an unnecessary hardware change. Aruba specifies SR for multimode fiber and LR for single-mode fiber up to 10 km.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!