QuestionQ11

VerifiedSwitching

‘Don't Buy at Us’ is a US-based retail company expanding into Europe. Its EMEA expansion includes a regional headquarters, HQ2, in The Netherlands.

Its US-based headquarters, HQ1, was refreshed last year using the HPE Aruba Networking ESP architecture. You created the HQ2 design using the same two-tier design as HQ1. The high-level design is shown below.

Question Image

Switch BOM for this project based on Two Tier:

  • Collapsed Core: 2 x 8360-16Y2C in VSX (ISL 2x100GbE DAC)
  • Access Stack: 10 x Stack of 6200F 48G Class4 PoE 4SFP+ 740W (each stack has 4 members, VSF with 10GbE VSF links) (2 x 10GbE uplink per stack)

During the presentation of your design to the CTO of ‘Don't Buy at Us’, you were informed of the changes they want incorporated into the updated design.

  1. HQ2 will include the EMEA regional distribution center (EMEA-DISTR) next to HQ2.
  2. Only two pairs of OS1 are available between HQ2 and EMEA-DISTR.
  3. The uplinks from all access stacks must increase to 2 x 25GbE; the fiber in HQ2 and EMEA-DISTRI is certified for 25GbE.
  4. EMEA-DISTR requires at least 7 x stack of Aruba 48 ports switches (each stack has 4 members).

Which answer, based on best practice, presents the correct Switch BOM for the updated design?

Explanation

An Aruba 6300F 48-port switch has four SFP56 interfaces that support the required 25GbE access uplinks and can be used for 50GbE VSF links. An 8360-16Y2C provides 16 25GbE ports and two 100GbE ports per switch. In a VSX aggregation pair, the 16 25GbE ports per peer support one 25GbE uplink from each of the 10 HQ2 stacks or each of the 7 EMEA-DISTR stacks, while the two 100GbE aggregation uplinks satisfy the available two OS1 fiber-pair inter-site connectivity. The 8360-32Y4C offers additional ports that are not needed for these stated access-stack counts.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!