Is the D-PSC-MN-01 practice exam free?

Yes. ExamCademy offers all 48 D-PSC-MN-01 practice questions for free with a registered account. No payment needed. Optional supporter features add AI explanations and spaced repetition study tools.

How accurate are the D-PSC-MN-01 practice questions?

All D-PSC-MN-01 questions are community-created and reviewed by moderators to align with Dell's published exam objectives. The community continuously reports and fixes issues to keep content accurate and up to date.

How should I study for the D-PSC-MN-01 exam?

Start by browsing practice questions to identify weak areas. Use spaced repetition (Learn Mode) to focus study time on topics you struggle with. Combine practice questions with official Dell documentation and hands-on experience for best results.

D-PSC-MN-01 Practice Exam — Free 48+ Questions

48Practice Questions

3Study Modes

FreeTo Get Started

Topic:Sort:

Question 1

PowerScale Hardware Maintenance

Question 2

PowerScale Hardware Installation

Question 3

PowerScale Hardware Concepts

Question 4

PowerScale Hardware Maintenance

Question 5

PowerScale Hardware Installation

Question 6

PowerScale Hardware Concepts

Question 7

PowerScale Hardware Maintenance

Question 8

PowerScale Hardware Installation

Question 9

PowerScale Hardware Concepts

Question 10

PowerScale Hardware Maintenance

Question 11

PowerScale Hardware Concepts

Question 12

PowerScale Implementation

Question 13

PowerScale Hardware Installation

Question 14

PowerScale Hardware Installation

Question 15

PowerScale Implementation

Question 16

PowerScale Hardware Concepts

Question 17

PowerScale Hardware Concepts

Question 18

PowerScale Hardware Installation

Question 19

PowerScale Hardware Installation

Question 20

PowerScale Hardware Installation

That's the end of the Preview

This exam has 48 community-verified practice questions. Create a free account to access all questions, comments, and explanations.

Topics covered:

PowerScale Hardware ConceptsPowerScale Hardware MaintenancePowerScale Hardware InstallationPowerScale Implementation

Log In / Sign Up

Page 1 of 2 • Questions 1-25 of 48

1 2

→

Know a question that should be here? Contribute to this exam

Refer to the exhibit.

Question Image

An engineer replaces the drive in C1. They run the isi devices drive list command and obtain the output that is shown.
What action must the engineer take?

A Run the isi devices drive add C1 command.
B Run the isi devices drive format C1 command.
C Update the firmware.
D Contact Dell support.

What is a prerequisite for installing the TPM after replacing the system board in a PowerScale F900?

A Verify the compatibility of the old TPM with the new system board.
B Keep the old TPM installed on the new system board.
C Ensure that a new TPM is available for installation.

Refer to the exhibit.

Question Image

A platform engineer has connected power cables to a Dell PowerScale Gen6 node.
What does the status indicator indicate?

A On and charging
B Mismatch of voltage or component firmware
C Standby and redundant
D On and healthy

Which resource should be consulted before performing any Dell PowerScale platform maintenance activities?

A Dell SolVe Online
B Dell iDRAC Service Module
C OneFS logs and error messages
D Dell Technical Support

An engineer plans to install nodes to a cabinet with space for new hardware. All six PDU ports are occupied
What is the recommended way to support the new nodes in this cabinet?

A Install four more PDUs to support the new nodes and future expansion.
B Install one more PDU to support the new nodes.
C Install two more PDUs to support the new nodes
D Locate available PDU ports in the next cabinet.

Which node is based on a Dell PowerEdge server?

A F900
B H700
C F800
D A300

Dell Technical Support has required a part be sent back to Dell Logistics to be studied.
Which process or document must be completed before sending the part back?

A CDMR
B WWFA
C DMR
D DTFA

A platform engineer is adding a node to a Dell PowerScale cluster. The node is powered on and cabled.
What option is displayed once the serial connection to the node is established?

A Reformat the node
B Upgrade node firmware
C Create a new cluster
D Configure the network

What is the isi devices node smartfail command used for?

A Failover a node
B Remove a node
C Add a node
D Failback a node.

What is recommended when replacing the M.2 card in a PowerScale Gen6 system?

A Ignore the battery pack and cable.
B Keep the battery caddy connected.
C Remove the battery pack and disconnect the cable.
D Leave the HBA riser in place.

Which port is used for the WebUI on a Dell PowerScale cluster?

A 9443
B 22
C 8080
D 8443

What is the purpose of SolVe Desktop?

A Provide customers with instructions for diagnosing hardware, replacing CRU and FRU hardware items, and updating the cluster after replacing parts.
B Provide a laptop connection to gather logs, perform pre-upgrade checks, install firmware and patches, and import data back to Dell support for analysis.
C Provide centralized access to step-by-step procedures while offline or in high-security locations.
D Provide access to the latest OneFS codes and firmware packages to download during hardware installation.

What is recommended when connecting the power cables to a new 4U chassis?

A Connect members of a node pair to different power sources.
B Connect individual chassis to alternating power sources.
C Connect each node in a chassis to one of four different PDUs.
D Connect one node pair to one power source and the other node pair to a different power source.

What must be verified during the installation of a fully populated Titan-HD rack with H7000 nodes?

A There are at least four people available to lift each node.
B Proper DC power is being supplied to the rack.
C The correct number of hard drives have been shipped.
D The data center floor is rated to support 1588 kg (3,500 lb).

A customer wants to create a cluster mixing F600 and A300 nodes.
What is the minimum number of each node type that they need to build the cluster?

A 4x F6004x A300
B 4x F6003x A300
C 3x F6004x A300
D 2x F6002x A300

What is the main purpose of the vault operation in PowerScale F200, F600 and F900?

A Erasure of data from NVDIMM flash during the restore process.
B Transfers data from DRAM to NVDIMM flash and conversely during BIOS startup
C Handles storing data in NVDIMM flash from DRAM

An engineer runs the isi status command.
What are they trying to accomplish?

A Obtain the health of the cluster.
B Show cluster CPU performance.
C Show cluster network performance
D Obtain the health of the drives in the cluster.

A customer wants to add SSDs to the drive sleds in a Dell PowerScale H600 node for expanded caching.
What should the platform engineer tell the customer?

A Caching SSDs are placed in dedicated slots in the compute module.
B Each node sled must have an equal number of caching SSDs.
C Only F200, F600, F810 nodes can use SSDs.
D Cache expansion requires a Dell Professional Services engagement.

A platform engineer is replacing a failed Dell PowerScale Gen6 node at a customer site. They remove all cables from the compute module and observe that some of the LEDs inside the node are lit.
What action must the platform engineer take?

A Contact technical support.
B Wait until the node is shut down.
C Shut down the partner node before proceeding.
D Continue on to the next step.

Following Dell best practices, which external network ports should be used on PowerScale A300 or A3000 nodes?

A 1/25 GbE or 20/40 GbE
B 10/40 GbE or 1/100 GbE
C 10/25 GbE or 40/100 GbE
D 1/100 GbE or 10/25 GbE

D-PSC-MN-01Preview

About the D-PSC-MN-01 Exam

Question 1

Question 2

Question 3

Question 4

Question 5

Question 6

Question 7

Question 8

Question 9

Question 10

Question 11

Question 12

Question 13

Question 14

Question 15

Question 16

Question 17

Question 18

Question 19

Question 20

That's the end of the Preview

D-PSC-MN-01Preview

About the D-PSC-MN-01 Exam

Mode Selection

Question 1

Question 2

Question 3

Question 4

Question 5

Question 6

Question 7

Question 8

Question 9

Question 10

Question 11

Question 12

Question 13

Question 14

Question 15

Question 16

Question 17

Question 18

Question 19

Question 20

That's the end of the Preview