Is this exam completely free?

Examcademy offers a free preview for every exam, covering around 20% of the total questions. Full access is available with a paid upgrade.

Can I practice IT certification exams from Microsoft, AWS, or CompTIA?

Yes! Examcademy supports a wide range of IT certification exams including Microsoft Azure, AWS Cloud Practitioner, and CompTIA A+ and Security+.

How accurate are the mock exams?

Our mock exams are built and reviewed with the help of AI and community contributions, staying aligned with real-world exam objectives.

Free preview mode

Enjoy the free questions and consider upgrading to gain full access!

200-301Free trial

By cisco

Verified

25Q per page

Question 201

SIMULATION

Guidelines

This is a lab item in which tasks will be performed on virtual devices

• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window
• All necessary preconfigurations have been applied
• Do not change the enable password or hostname for any device
• Save your configurations to NVRAM before moving to the next item
• Click Next at the bottom of the screen to submit this lab and move to the next question
• When Next is clicked the lab closes and cannot be reopened

Topology

Tasks

All physical cabling is in place. A company plans to deploy 16 new sites. The sites will utilize both IPv4 and IPv6 networks.

Subnet 172.16.0.0/16 to meet the subnet requirements and maximize the number of hosts
• Using the second subnet

Assign the first usable IP address to e0/0 on Sw101
Assign the last usable IP address to e0/0 on Sw102

Subnet 2001:DB8::/50 to meet the subnet requirements and maximize the number of hosts
• Using the second subnet

Assign an IPv6 GUA using a unique 64-Bit interface identifier on e0/0 on Sw101
Assign an IPv6 GUA using a unique 64-Bit interface identifier on e0/0 on Sw102

—

Question 202

Which interface is used to send traffic to the destination network?

A: G0/21
B: G0/4
C: G0/5
D: G0/16

—

Question 203

DRAG DROP

Drag and drop the characteristic from the left onto the cable type on the right.

—

Question 204

Refer to the exhibit. Which switch becomes the root bridge?

A: SW 4 - Bridge Priority - 49152 - mac-address 06:8e:bc:7e:5b:85
B: SW 3 - Bridge Priority - 49152 - mac-address 0d:e4:96:da:ee:95
C: SW 1 - Bridge Priority - 36864 - mac-address 05:a7:23:5b:52:25
D: SW 2 - Bridge Priority - 36864 - mac-address 04:1e:c4:bf:02:55

—

Question 205

DRAG DROP

Drag and drop the IPv6 address from the left onto the type on the right.

—

Question 206

Which interface condition is occurring in this output?

A: duplex mismatch
B: high throughput
C: bad NIC
D: broadcast storm

—

Question 207

What is the collapsed layer in collapsed core architectures?

A: Core and distribution
B: access and WAN
C: distribution and access
D: core and WAN

—

Question 208

DRAG DROP

Drag and drop the characteristic from the left onto the IPv6 address type on the right.

—

Question 209

What are two functions of DHCP servers? (Choose two.)

A: issue DHCPDISCOVER messages when added to the network
B: respond to client DHCPOFFER requests by Issuing an IP address
C: support centralized IP management
D: assign dynamic IP configurations to hosts in a network
E: prevent users from assigning their own IP addresses to hosts

—

Question 210

What is the operating mode and role of a backup port on a shared LAN segment in Rapid PVST+?

A: learning mode and provides the shortest path toward the root bridge handling traffic away from the LAN
B: blocking mode and provides an alternate path toward the designated bridge
C: forwarding mode and provides the lowest-cost path to the root bridge for each VLAN
D: listening mode and provides an alternate path toward the root bridge

—

Question 211

A network architect is deciding whether to implement Cisco autonomous access points or lightweight access points. Which fact about firmware updates must the architect consider?

A: Unlike lightweight access points, which require redundant WLCs to support firmware upgrades, autonomous access points require only one WLC.
B: Unlike autonomous access points, lightweight access points require a WLC to implement remote firmware updates.
C: Unlike lightweight access points, autonomous access points can recover automatically from a corrupt firmware update.
D: Unlike autonomous access points, lightweight access points store a complete copy of the current firmware for backup.

—

Question 212

What is the role of SNMP in the network?

A: to monitor and manage network devices using a UDP underlay that operates on the application layer
B: to collect data directly from network devices using an SSL underlay that operates on the transport layer
C: to monitor network devices and functions using a TCP underlay that operates on the presentation layer
D: to collect telemetry and critical information from network devices using an SSH underlay that operates on the network layer

—

Question 213

Refer to the exhibit. Which configuration enables SW2 to establish an LACP EtherChannel?

—

Question 214

Refer to the exhibit. What is the issue with the interface GigabitEthernet0/0/1?

A: port security
B: cable disconnect
C: high throughput
D: duplex mismatch

—

Question 215

Refer to the exhibit. Router R1 receives static routing updates from routers A, B, C, and D. The network engineer wants R1 to advertise static routes in OSPF area 1. Which summary address must be advertised in OSPF?

A: 10.1.41.0/25
B: 10.1.40.0/24
C: 10.1.40.0/25
D: 10.1.40.0/23

—

Question 216

An on-site service desk technician must verify the IP address and DNS server information on a user’s Windows computer. Which command must the technician enter at the command prompt on the user’s computer?

A: show interface
B: ipconfig /all
C: netstat -r
D: ifconfig -a

—

Question 217

DRAG DROP -

Refer to the exhibit. Drag and drop the networking parameters from the left onto the correct values on the right.
Select and Place:

—

Question 218

What is a characteristic of a SOHO network?

A: includes at least three tiers of devices to provide load balancing and redundancy
B: connects each switch to every other switch in the network
C: enables multiple users to share a single broadband connection
D: provides high throughput access for 1000 or more users

—

Question 219

Which type of IPv4 address must be assigned to a server to protect it from external access and allow only internal users access while restricting internet access?

A: private
B: public
C: global unicast
D: multicast

—

Question 220

What differentiates the Cisco OfficeExtend AP mode from the Cisco FlexConnect AP mode?

A: FlexConnect allows a personal SSID to be configured on the AP, and personal SSIDs are not supported with OfficeExtend.
B: OfficeExtend does not support DTLS tunneling of traffic to the WLC, and FlexConnect tunnels traffic to the WLC with DTLS.
C: FlexConnect must be deployed behind a router that NATs the client traffic, and OfficeExtend uses public IP sources.
D: OfficeExtend mode requires indoor APs with internal antennas, and indoor and outdoor APs use FlexConnect mode.

—

Question 221

Refer to the exhibit. An administrator must connect SW_1 and the printer to the network. SW_2 requires DTP to be used for the connection to SW_1. The printer is configured as an access port with VLAN 5. Which set of commands completes the connectivity?

A: switchport mode dynamic auto switchport private-vlan association host 5
B: switchport mode trunk switchport trunk pruning vlan add 5
C: switchport mode dynamic desirable switchport trunk allowed vlan add 5
D: switchport mode dynamic auto switchport trunk encapsulation negotiate

—

Question 222

Refer to the exhibit. Which per-hop QoS behavior is R1 applying to incoming packets?

A: marking
B: shaping
C: queuing
D: policing

—

Question 223

What is the role of the root port in a switched network?

A: It replaces the designated port when the designated port fails.
B: It replaces the designated port when the root port fails.
C: It is the best path to the root from a nonroot switch.
D: It is administratively disabled until a failover occurs.

—

Question 224

What is the temporary state that switch ports always enter immediately after the boot process when Rapid PVST+ is used?

A: forwarding
B: listening
C: learning
D: discarding

—

Question 225

What is used to identify spurious DHCP servers?

A: DHCPACK
B: DHCPREQUEST
C: DHCPOFFER
D: DHCPDISCOVER

—

Page 9 of 55 • Questions 201-225 of 1369

←

7 8 9 10 11

→

Free preview mode

Enjoy the free questions and consider upgrading to gain full access!