Free preview mode

Enjoy the free questions and consider upgrading to gain full access!

200-301Free trialFree trial

By cisco
Aug, 2025

Verified

25Q per page

Question 226

Image 1

Refer to the exhibit. A packet sourced from 10.10.10.1 is destined for 172.16.3.254. What is the subnet mask of the destination route?

  • A: 0.0.0.0
  • B: 255.255.254.0
  • C: 255.255.255.0
  • D: 255.255.255.255
—

Question 227

What is the role of disaggregation in controller-based networking?

  • A: It divides the control-plane and data-plane functions.
  • B: It streamlines traffic handling by assigning individual devices to perform either Layer 2 or Layer 3 functions
  • C: It summarizes the routes between the core and distribution layers of the network topology
  • D: It enables a network topology to quickly adjust from a ring network to a star network
—

Question 228

Image 1

Refer to the exhibit. IPv6 must be implemented on R1 to the ISP. The uplink between R1 and the ISP must be configured with a manual assignment, and the LAN interface must be self-provisioned. Both connections must use the applicable IPv6 networks. Which two configurations must be applied to R1? (Choose two.)

  • A: interface Gi0/0 ipv6 address 2001:db8:0F1B:FCCB:ACCE:FCED:ABCD:FA03:/127
  • B: interface Gi0/0 ipv6 address 2001:db8:0:AFFF::/64 eui-64
  • C: interface Gi0/1 ipv6 address 2001:db8:0F1B:FCCB:ACCE:FCED:ABCD:FA02:/127
  • D: interface Gi0/0 ipv6 address 2001:db8:1:AFFF::/64 eui-64
  • E: interface Gi0/1 ipv6 address 2001:db8:0F1B:FCCB:ACCE:FCED:ABCD:FA00:/127
—

Question 229

Image 1

Refer to the exhibit. What does the host do when using the IPv4 Preferred function?

  • A: It forces the DNS server to provide the same IPv4 address at each renewal.
  • B: It requests the same IPv4 address when it renews its lease with the DHCP server.
  • C: It prefers a pool of addresses when renewing the IPv4 host IP address.
  • D: It continues to use a statically assigned IPv4 address.
—

Question 230

Image 1

Refer to the exhibit. What is preventing host A from reaching the internet?

  • A: LAN and WAN network segments are different.
  • B: The domain name server is unreachable.
  • C: The default gateway should be the first usable IP address.
  • D: IP address assignment is incorrect.
—

Question 231

What are two capabilities provided by VRRP within a LAN network? (Choose two.)

  • A: redundancy
  • B: granular QoS
  • C: load sharing
  • D: dynamic routing updates
  • E: bandwidth optimization
—

Question 232

Which AP mode is used for capturing wireless traffic and forwarding that traffic to a PC that is running a packet analyzer?

  • A: bridge
  • B: monitor
  • C: rouge detector
  • D: sniffer
—

Question 233

Image 1

Refer to the exhibit. The IPv6 address for the LAN segment on router R2 must be configured using the EUI-64 format. When configured which ipv6 address is produced by the router?

  • A: 2001:db8:d955:1008:12D8:BAFE:FF01:1
  • B: 2001:db8:d955:1008:4598:785F:FE25:1
  • C: 2001:db8:d955:1008:1030:ABFF:FECC:1
  • D: 2001:db8:d955:1008:10D8:BAFF:FEC2:1
—

Question 234

SIMULATION

Guidelines

This is a lab item in which tasks will be performed on virtual devices.

• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked, the lab doses and cannot be reopened.

Topology

Image 1

Tasks

Refer to the topology. All physical cabling is in place. Routers R3 and R4 are fully configured and inaccessible. Configure static routes for various connectivity to the ISP and the LAN, which
resides on R4.

  1. Configure a default route on R2 to the ISP
  2. Configure a default route on R1 to the ISP
  3. Configure R2 with a route to the Server at 10.0.41.10
  4. Configure R1 with a route to the LAN that prefers R3 as the primary path to the LAN
—

Question 235

Which components are contained within a virtual machine?

  • A: physical resources, including the NIC, RAM, disk, and CPU
  • B: configuration files backed by physical resources from the Hypervisor
  • C: applications running on the Hypervisor
  • D: processes running on the Hypervisor and a guest OS
—

Question 236

Which interface IP address serves as the tunnel source for CAPWAP packets from the WLC to an AP?

  • A: service
  • B: trunk
  • C: AP-manager
  • D: virtual AP connection
—

Question 237

What does a switch search for in the CAM table when forwarding a frame?

  • A: source MAC address and aging time
  • B: destination MAC address and flush time
  • C: source MAC address and source port
  • D: destination MAC address and destination port
—

Question 238

What is a function performed by a web server?

  • A: send and retrieve email from client devices
  • B: securely store files for FTP access
  • C: authenticate and authorize a user's identity
  • D: provide an application that is transmitted over HTTP
—

Question 239

Which port type does a lightweight AP use to connect to the wired network when configured in FlexConnect mode with local switching and VLAN tagging?

  • A: trunk
  • B: LAG
  • C: EtherChannel
  • D: access
—

Question 240

Image 1

Refer to the exhibit. PC A is communicating with another device at IP address 10.227.151.255. Through which router does router Y route the traffic?

  • A: router A
  • B: router B
  • C: router C
  • D: router D
—

Question 241

Image 1

Refer to the exhibit. VoIP is being implemented in the network using VLAN ID 73 and named "VoIP". Each user needs a Cisco IP phone at their desk. Switchport e0/0 has been configured as an access port in the data VLAN. Cisco Discovery Protocol is enabled globally. Which command sequence completed the configuration?

  • A: vlan73 name VoIP e0/0 switchport voice vlan dot1p
  • B: vlan 73 name VoIP e0/0 switchport trunk allowed vlan 72,73 switchport voice vlan 73
  • C: vlan 73 name VoIP e0/0 switchport mode trunk channel-group 73 mode active
  • D: vlan 73 name VoIP e0/0 switchport voice vlan 73
—

Question 242

Image 1

Refer to the exhibit. Which IP route command created the best path for a packet destined for 10.10.10.3?

  • A: ip route 10.10.0.0 255.255.252.0 g0/0
  • B: ip route 10.10.10.0 255.255.255.240 g0/0
  • C: ip route 10.0.0.0 255.0.0.0 g0/0
  • D: ip route 10.10.10.1 255.255.255.255 g0/0
—

Question 243

Which cable type must be used when connecting a router and switch together using these criteria?

• Pins 1 and 2 are receivers and pins 3 and 6 are transmitters.
• Auto detection MDI-X is unavailable.

  • A: crossover
  • B: rollover
  • C: console
  • D: straight-through
—

Question 244

Which protocol does a REST API use to communicate?

  • A: SSH
  • B: STP
  • C: SNMP
  • D: HTTP
—

Question 245

Which interface on the WLC is limited to one when LAG is in use?

  • A: service
  • B: virtual
  • C: trunk
  • D: AP-manager
—

Question 246

Image 1

Refer to the exhibit. A newly configured PC fails to connect to the internet by using TCP port 80 to www.cisco.com. Which setting must be modified for the connection to work?

  • A: Subnet Mask
  • B: DNS Servers
  • C: Default Gateway
  • D: DHCP Servers
—

Question 247

Which fact must the engineer consider when implementing syslog on a new network?

  • A: Syslog defines the software or hardware component that triggered the message.
  • B: There are 16 different logging levels (0-15).
  • C: The logging level defines the severity of a particular message.
  • D: By default, all message levels are sent to the syslog server.
—

Question 248

In what way does a network supervisor reduce maintenance costs while maintaining network integrity on a traditionally managed network?

  • A: They install an automated network-monitoring system to provide early warning of network issues.
  • B: They employ additional network administrators to proactively manage the network.
  • C: They use automation to centralize network-management tasks.
  • D: They automate change-management processes that verify issue resolution.
—

Question 249

Image 1

Refer to the exhibit. Site A was recently connected to site B over a new single-mode fiber path. Users at site A report intermittent connectivity issues with applications hosted at site B. What is the reason for the problem?

  • A: Physical network errors are being transmitted between the two sites.
  • B: Heavy usage is causing high latency.
  • C: The wrong cable type was used to make the connection.
  • D: An incorrect type of transceiver has been inserted into a device on the link
—

Question 250

Which type of wired port is required when an AP offers one unique SSID, passes client data and management traffic, and is in autonomous mode?

  • A: trunk
  • B: default
  • C: access
  • D: LAG
—
Page 10 of 55 • Questions 226-250 of 1369
←
89101112
→

Free preview mode

Enjoy the free questions and consider upgrading to gain full access!