Free preview mode

Enjoy the free questions and consider upgrading to gain full access!

200-301Free trialFree trial

By cisco
Aug, 2025

Verified

25Q per page

Question 26

Image 1

Refer to the exhibit. What does apple represent within the JSON data?

  • A: array
  • B: object
  • C: number
  • D: string
—

Question 27

DRAG DROP

Drag and drop the use cases of device-management technologies from the left onto the corresponding types on the right.

Image 1
—

Question 28

Under the CRUD model, which two HTTP methods support the UPDATE operation? (Choose two.)

  • A: PATCH
  • B: DELETE
  • C: GET
  • D: POST
  • E: PUT
—

Question 29

A network architect is considering whether to implement Cisco DNA Center to deploy devices on a new network. The organization is focused on reducing the time it currently takes to deploy devices in a traditional campus design. For which reason would Cisco DNA Center be more appropriate than traditional management options?

  • A: Cisco DNA Center supports deployment with a single pane of glass.
  • B: Cisco DNA Center provides zero-touch provisioning to third-party devices.
  • C: Cisco DNA Center reduces the need for analytics on third-party access points and devices.
  • D: Cisco DNA Center minimizes the level of syslog output when reporting on Cisco devices.
—

Question 30

DRAG DROP

Drag and drop the statements about device management from the left onto the corresponding device-management types on the right.

Image 1
—

Question 31

In a cloud-computing environment, what is rapid elasticity?

  • A: control and monitoring or resource consumption by the tenant
  • B: automatic adjustment of capacity based on need
  • C: pooling resources in a multitenant model based on need
  • D: self-service of computing resources by the tenant
—

Question 32

Which interface enables communication between a program on the controller and a program on the networking device?

  • A: software virtual interface
  • B: tunnel interface
  • C: northbound interface
  • D: southbound interface
—

Question 33

Image 1

Refer to the exhibit. How many arrays are present in the JSON data?

  • A: one
  • B: three
  • C: six
  • D: nine
—

Question 34

DRAG DROP

Drag and drop the configuration management terms from the left onto the descriptions on the right. Not all terms are used.

Image 1
—

Question 35

Which interface type enables an application running on a client to send data over an IP network to a server?

  • A: northbound interface
  • B: application programming interface
  • C: southbound interface
  • D: Representational State Transfer application programming interface
—

Question 36

Image 1

Refer to the exhibit. The given Windows PC is requesting the IP address of the host at www.cisco.com. To which IP address is the request sent?

  • A: 192.168.1.253
  • B: 192.168.1.100
  • C: 192.168.1.226
  • D: 192.168.1.254
—

Question 37

Image 1

Refer to the exhibit. The IPv6 address for the LAN segment on router R2 must be configured using the EUI-64 format. When configured which ipv6 address is produced by the router?

  • A: 2001:db8:9aa6:6aa9:C801:A6FF:FEA4:1
  • B: 2001:db8:9aa6:6aa9:C081:A6FF:FF4A:1
  • C: 2001:db8:9aa6:6aa9:C001:6AFE:FF00:1
  • D: 2001:db8:9aa6:6aa9:4642:823F:FE47:1
—

Question 38

Which QoS feature drops traffic that exceeds the committed access rate?

  • A: policing
  • B: FIFO
  • C: shaping
  • D: weighted fair queuing
—

Question 39

What does traffic shaping do?

  • A: It queues excess traffic
  • B: It sets QoS attributes within a packet
  • C: It organizes traffic into classes
  • D: It modifies the QoS attributes of a packet
—

Question 40

Image 1

Refer to the exhibit. A Cisco engineer is asked to update the configuration on switch 1 so that the EtherChannel stays up when one of the links fails. Which configuration meets this requirement?

  • A: Switch1(config) # interface Fa0/0 Switch1(config-if) # lacp port-priority 100 Switch1(config) # interface Fa0/1 Switch1(config-if) # lacp port-priority 200
  • B: Switch1(config) # interface port-channel 1 Switch1(config-if) # port-channel min-links 1
  • C: Switch1(config) # interface Fa0/0 Switch1(config-if) # lacp port-priority 200 Switch1(config) # interface Fa0/1 Switch1(config-if) # lacp port-priority 100
  • D: Switch1(config) # interface port-channel 1 Switch1(config-if) # lacp max-bundle 1
—

Question 41

Which two protocols are supported on service-port interfaces? (Choose two.)

  • A: Telnet
  • B: SCP
  • C: TACACS+
  • D: SSH
  • E: RADIUS
—

Question 42

What is the benefit of using private IPv4 addressing?

  • A: to enable secure connectivity over the Internet
  • B: to shield internal network devices from external access
  • C: to provide reliable connectivity between like devices
  • D: to be routable over an external network
—

Question 43

Two switches have been implemented and all interfaces are at the default configuration level. A trunk link must be implemented between two switches with these requirements:

• using an industry-standard trunking protocol
• permitting VLANs 1-10 and denying other VLANs

How must the interconnecting ports be configured?

  • A: switchport mode dynamic channel-protocol lacp switchport trunk allowed vlans 1-10
  • B: switchport mode trunk switchport trunk allowed vlans 1-10 switchport trunk native vlan 11
  • C: switchport mode trunk switchport trunk encapsulation dot1q switchport trunk allowed vlans 1-10
  • D: switchport mode dynamic desirable channel-group 1 mode desirable switchport trunk encapsulation isl switchport trunk allowed vlan except 11-4094
—

Question 44

Image 1

Refer to the exhibit. Traffic that is flowing over interface TenGigabitEthemet0/0/0 experiences slow transfer speeds. What is the cause of this issue?

  • A: speed conflict
  • B: queuing drops
  • C: duplex incompatibility
  • D: heavy traffic congestion
—

Question 45

Which two host addresses are reserved for private use within an enterprise network? (Choose two.)

  • A: 10.172.76.200
  • B: 12.17.1.20
  • C: 172.15.2.250
  • D: 172.31.255.100
  • E: 192.169.32.10
—

Question 46

Image 1

Refer to the exhibit. The iPv6 address for the LAN segment on router R2 must be configured using the EUI-64 format. Which address must be used?

  • A: ipv6 address 2001:DB8:D8D2:1009:10A0:ABFF:FECC:1 eui-64
  • B: ipv6 address 2001:DB8:D8D2:1009:1230:ABFF:FECC:1 eui-64
  • C: ipv6 address 2001:DB8:D8D2:1009:4347:31FF:FF47:0 eui-64
  • D: ipv6 address 2001:DB8:D8D2:1009:12A0:AB34:FFCC:1 eui-64
—

Question 47

Which function forwards frames to ports that have a matching destination MAC address?

  • A: frame flooding
  • B: frame filtering
  • C: frame pushing
  • D: frame switching
—

Question 48

What are two reasons to configure PortFast on a switch port attached to an end host? (Choose two.)

  • A: to block another switch or host from communicating through the port
  • B: to enable the port to enter the forwarding state immediately when the host boots up
  • C: to prevent the port from participating in Spanning Tree Protocol operations
  • D: to protect the operation of the port from topology change processes
  • E: to limit the number of MAC addresses learned on the port to 1
—

Question 49

SIMULATION

Guidelines

This is a lab item in which tasks will be performed on virtual devices

• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window
• All necessary preconfigurations have been applied
• Do not change the enable password or hostname for any device
• Save your configurations to NVRAM before moving to the next item
• Click Next at the bottom of the screen to submit this lab and move to the next question
• When Next is clicked the lab closes and cannot be reopened

Topology

Image 1

Tasks

Physical connectivity is implemented between the two Layer 2 switches, and the network connectivity between them must be configured.

  1. Configure an LACP EtherChannel and number it as 44; configure it between switches SW1 and SW2 using interfaces Ethemet0/0 and Ethernet0/1 on both sides. The LACP mode must match on both ends.
  2. Configure the EtherChannel as a trunk link.
  3. Configure the trunk link with 802.1q tags.
  4. Configure VLAN 'MONITORING' as the untagged VLAN of the EtherChannel.
—

Question 50

A network administrator wants the syslog server to filter incoming messages into different files based on their importance. Which filtering criteria must be used?

  • A: message body
  • B: level
  • C: facility
  • D: process ID
—
Page 2 of 55 • Questions 26-50 of 1369
←
12345
→

Free preview mode

Enjoy the free questions and consider upgrading to gain full access!