QuestionQ11Verified/L2 and L3 EVPN Multi-homingCopy linkReport a problemAsk AstroTutorSave questionWhich statement about configuring Layer 3 multihoming with a centralized router is FALSE?AThe centralized router must be a member of the Ethernet segment.BAll routers participating in the Ethernet segment must have the multi-homing mode set to all-active.CRemote leaf routers can load balance traffic to customer prefixes through the leaf routers connected to the Ethernet segment.DThe centralized router will advertise the customer prefixes using an EVPN route-type 5 update.Show AnswerAnswerExplanationIn Nokia’s centralized-router Layer 3 EVPN multihoming design, the leaf routers and the centralized router’s Ethernet segment must operate in single-active mode. An all-active multihoming setting is therefore not a required configuration and conflicts with this design.Learn moreNokia SR Linux EVPN and Data Center Interconnect Practice ExamShow comments0Show commentsCommunity DiscussionNo comments yet. Be the first to start the discussion!
Community Discussion