QuestionQ73Verified/VPLS FeaturesCopy linkReport a problemAsk AstroTutorSave questionWhich of the following describes the configuration of the l-SID on the Alcatel-Lucent 7750 SR?AThe I-SID is set to 0 by default and is only used for interop purposes. The receiving PE uses the service label to determine the I-VPLS.BThere is no default value. The I-SID must always be explicitly configuredCThe I-SID is set to the service-id, unless the service-id is larger than a 24 bit value. In this case the I-SID must be explicitly configured.DThe I-SID is always set to the service-id by default.Show AnswerAnswerExplanationAn I-SID is limited to 24 bits. On SR OS, its default is the service ID, but service IDs can be larger than the 24-bit I-SID range; an explicit I-SID configuration is therefore required when the service ID exceeds that range.Learn moreNokia 7750 SR VPLS Service Configuration Command ReferenceShow comments0Show commentsCommunity DiscussionNo comments yet. Be the first to start the discussion!
Community Discussion