QuestionQ46

VerifiedEthernet switching network construction

In the network shown, STP is enabled on every device. The bridge priorities and MAC addresses of the two switches are displayed in the figure, and all other parameters use their default values. After GE1/0/1 on SW1 fails and the network becomes stable, GE1/0/2 on SW2 becomes the designated port.

Question Image

Explanation

With equal bridge priorities, the switch with the lower MAC address is elected the root bridge. SW1 has the lower MAC address, so it is the root bridge. On the remaining link, SW1's GE1/0/2 is the designated port and SW2's GE1/0/2 is the root port, not a designated port.

Community Discussion

No comments yet. Be the first to start the discussion!