QuestionQ45

VerifiedBuild an IP network with interconnection and interworking

Given the routing table below, which source IP address does R1 use when it sends an ICMP packet to ping 10.0.3.3?

Question Image

Explanation

The route to 10.0.3.3 uses GE0/0/2 with next hop 10.0.23.3. R1's address on that outgoing 10.0.23.0/24 link is 10.0.23.2, so it is used as the source address for the ICMP echo packet when no source is explicitly configured.

Community Discussion

No comments yet. Be the first to start the discussion!