QuestionQ40

VerifiedEthernet switching network construction

On the switched network shown, STP is enabled on every device. SW1 is the root bridge, and the figure shows the port costs. All other parameters use their default values. Match the stable port roles to the ports. A token can be reused.

Question Image

Drag & Drop
SW1 GE1/0/1
SW1 GE1/0/2
SW2 GE1/0/1
SW2 GE1/0/3
SW3 GE1/0/2
SW3 GE1/0/3
Explanation

SW1 is the root bridge, so both of its ports (GE1/0/1 and GE1/0/2) are designated ports; a root bridge has no root port. A port's root path cost is the root path cost advertised in the received BPDU plus the cost of the receiving port. SW2 receives the root bridge's BPDU on GE1/0/1, giving a root path cost of 0 + 50 = 50; any path through SW3 would add GE1/0/3's cost of 60 to SW3's own root path cost and is therefore higher, so SW2 GE1/0/1 is the root port. SW3 compares its direct path through GE1/0/2 (0 + 100 = 100) with the path through SW2 received on GE1/0/3 (50 + 40 = 90); 90 is lower, so SW3 GE1/0/3 is the root port and SW3 GE1/0/2 is an alternate port, blocked as a backup path to the root. On the SW2-SW3 link, SW2 advertises the lower root path cost (50 versus 90), so SW2 GE1/0/3 is the designated port.

Community Discussion

No comments yet. Be the first to start the discussion!