QuestionQ39

VerifiedEthernet switching network construction

On the network shown, PC1 and PC4 are in VLAN 10, while PC2 and PC3 are in VLAN 20. The administrator configured the vlan batch 10 20 command on both switches. To allow Layer 2 communication between PCs in the same VLAN and isolate services between VLANs, match each interface with its configuration. Tokens may be reused.

Question Image

Drag & Drop
GE1/0/1 of SW1
GE1/0/2 of SW1
GE1/0/3 of SW1
GE1/0/1 of SW2
GE1/0/2 of SW2
GE1/0/3 of SW2
Explanation

An access port places untagged endpoint traffic into its configured default VLAN, so ports connected to PC1 and PC4 use VLAN 10 and ports connected to PC2 and PC3 use VLAN 20. The inter-switch link must transport both VLANs with their 802.1Q VLAN identifiers intact, so the hybrid link carries VLANs 10 and 20 as tagged traffic. The untagged hybrid option would strip VLAN tags and cannot preserve VLAN separation across the inter-switch link.

Community Discussion

No comments yet. Be the first to start the discussion!