QuestionQ28

VerifiedWLAN basics

In the small WLAN shown, the WAC functions as the DHCP server, assigning IP addresses to APs and STAs. The management VLAN is 100, the service VLAN is 110, and user data is forwarded in tunnel mode.

Which switch and WAC interface configuration is correct?

Question Image

Explanation

With tunnel forwarding, an AP encapsulates STA service traffic in CAPWAP and sends it to the WAC, so the physical AP-to-WAC path needs to carry the AP management VLAN rather than the service VLAN. VLAN 100 must be the AP-facing port’s PVID so untagged AP management and DHCP traffic enters the management VLAN; VLAN 100 must also be allowed across the switch-to-WAC link and WAC interface.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!