QuestionQ74

VerifiedArchitect the solution

A colleague has produced a proposed design for a large enterprise customer that uses HPE Aruba Networking AOS-CX 6300 switches at the wired access layer. The customer requires a secure, scalable solution founded on Zero Trust Security (ZTS) principles.

In the current environment, endpoint devices connected to access switches are configured to transmit 802.1Q-tagged frames, and the new design plans to tunnel traffic from the switches to an AOS-10 Gateway cluster by using User-Based Tunneling (UBT) in its default mode.

During a design review, you are asked to determine whether this solution supports the customer requirement to retain endpoint VLAN tags across the tunnel.

You recommend a modification, explaining that the proposed default configuration will not satisfy the customer’s technical requirement.

Which UBT configuration would support the customer requirement to preserve VLAN tagging from the endpoints across the UBT tunnel to the gateway?

Explanation

AOS-CX UBT VLAN-extend mode supports tagged UBT users and requires the user-role VLAN to be configured on the switch. Local/reserved VLAN mode is the default mode, but it supports only untagged UBT users. Configuring VLAN 10 on both the 6300 switch and the gateway cluster enables the VLAN-extend design to carry the endpoint VLAN association across the UBT tunnel.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!