QuestionQ67
VerifiedPropose the solutionA global cruise-line company must refresh its current fleet. It will refresh the ship’s “insides” to remain cost-effective and improve sustainability, replacing all WLAN/LAN hardware. During this refresh, the company will retain its current security requirements. The CIO also wants to minimize the number of unused switch ports. Any future expansion will always involve a hardware refresh. The company begins with its smallest ship, supporting a maximum of 800 guests.
Each ship has a LAN infrastructure comprising two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are in the ship’s MDF, and the distribution switches are in the IDFs. Each cabin and technical room has one access switch.
The ship’s cabling structure will not be refreshed. Each IDF connects to the MDF through SMF, with two pairs available for the core-to-distribution interconnect. The MDF-to-IDF SMF run is under 300 meters (980 ft) and uses OS1 fiber. Each cabin connects to its IDF through a single OM2 pair, with a maximum length of 60 meters (200 ft). Each technical room connects to its IDF through a single OM2 pair, with lengths from 100 to 150 meters (320 to 500 ft).
For every cabin and technical room, the customer wants to replace its current fanless 2530/2540 without changing requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and technical rooms require redundant power.
The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. It uses 200/300-series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no changes to WLAN requirements.
The cruise-line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide 99.8% uptime, required to keep paid guest Wi-Fi operational. With this new Internet connection, the CIO wants to base the design on Aruba’s ESP architecture because the Internet connection is guaranteed.
Based on HPE Aruba Networking best practices and the customer’s stated requirements, which segmentation design approach is suitable for this environment?
Community Discussion