QuestionQ42
VerifiedPropose the solutionA global cruise-line company needs to modernize its existing fleet. It will refresh the ship’s “insides” to reduce costs and improve sustainability, replacing all WLAN/LAN hardware. During this refresh, the company will retain its existing security requirements. The CIO also wants to minimize the number of unused switch ports. Any future expansion will always require a hardware refresh. The project starts with the smallest ship, which supports a maximum of 800 guests.
Each ship has a LAN infrastructure with two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches reside in the ship’s MDF, while distribution switches reside in the IDFs. Each cabin and technical room receives one individual access switch.
The ship’s cabling infrastructure will not be refreshed. Every IDF connects to the MDF using SMF, with two pairs available for the core-to-distribution interconnect. The SM fiber between the MDF and IDF is under 300 meters (980 ft) and is OS1. Each cabin connects to its IDF using one OM2 pair, at a maximum distance of 60 meters (200 ft). Each technical room connects to its IDF with one OM2 pair, at distances from 100 to 150 meters (320 to 500 ft).
For every cabin/technical room, the customer wants to replace the current fanless 2530/2540 switches without altering requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and technical rooms require redundant power.
The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. The WLAN uses 200/300 Series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no changes to WLAN requirements.
The cruise-line company will replace its existing Internet connection before the LAN/WLAN refresh. The new Internet connection will offer 99.8% uptime, required to keep paid guest Wi-Fi continually operational. With this new Internet connection, the CIO wants to base the design on Aruba’s ESP architecture because the Internet connection is guaranteed.
Based on best practices and customer requirements, which switch series should be recommended for the core?
Community Discussion