QuestionQ40

VerifiedPropose the solution

A global cruise-line company must modernize its existing fleet. It will refresh the ship’s “insides” to reduce cost and improve sustainability, replacing all WLAN/LAN hardware. This refresh will retain the current security requirements. The CIO also wants to minimize unused switch ports. Any future expansion will require a hardware refresh. The company will begin with its smallest ship, which accommodates a maximum of 800 guests.

Each ship has a LAN infrastructure comprising two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are in the ship’s MDF, and the distribution switches are in the IDFs. Every cabin and technical room receives a single access switch.

The ship’s cabling infrastructure will not be replaced. Each IDF connects to the MDF through SMF, with two pairs available for the core-to-distribution interconnect. The SM fiber length between the MDF and IDF is under 300 meters (980 ft), and the fiber type is OS1. Each cabin connects to its IDF using one OM2 pair, with a maximum length of 60 meters (200 ft). Each technical room connects to its IDF through one OM2 pair, with lengths from 100 to 150 meters (320 to 500 ft).

For every cabin/technical room, the customer wants to replace its existing fan-less 2530/2540 switches without changing the requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and technical rooms require redundant power.

The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. It is based on 200/300-series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no changes to WLAN requirements.

The cruise-line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide 99.8% uptime, which is required to keep paid guest Wi-Fi operational. With this new Internet connection, the CIO wants to base the design on Aruba’s ESP architecture because the Internet connection is guaranteed.

Based on best practices, which switch model should be recommended as the most cost-effective option for the technical rooms?

Explanation

The HPE Aruba Networking CX 6200M 24G Class4 PoE 4SFP+ provides 24 1 GbE Class 4 PoE access ports and four SFP+ uplink ports, so it supplies the required 10 GbE uplink without paying for unnecessary Smart Rate access ports, higher PoE classes, or 25/50 GbE uplinks. The 6200M platform supports two modular power supplies; the second supply provides redundant system power. This makes the 24-port 6200M the cost-effective fit when port usage must be kept low and no enhanced endpoint-speed or PoE requirement exists.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!