QuestionQ25Verified/RoutingCopy linkReport a problemAsk AstroTutorSave questionRefer to the exhibits. Which statement is true based on the following CLI output from a CX 6300?AThere are no active fabric clients on the CX switch with RD 172.16.10.1.BA wired client with IP address 10.203.1.100 has a host route that is not being properly advertised.CThe overlay loopback addresses are advertised in the fabric with 24-bit subnet masks.DA wired client with IP address 10.203.1.100 is on a remote CX 6300 in the fabric with loopback IP address 172.21.11.2.Show AnswerAnswerExplanationEVPN route type 2 advertises a locally learned MAC/IP binding, whereas route type 5 advertises an IP prefix. The L3VNI section for RD 172.21.10.1 contains only type-5 routes and no type-2 MAC/IP routes, indicating that this switch has no active fabric clients. The 10.203.1.100 MAC/IP binding is advertised through next hop 172.21.11.3, not 172.21.11.2.Learn moreAOS-CX 10.10 EVPN VXLAN GuideShow comments1Show commentsCommunity DiscussionNo comments yet. Be the first to start the discussion!
Community Discussion