QuestionQ41

VerifiedPlan the low-level design

A customer is a large wireless network operator with these requirements:

  • Networking-hardware racks are 2-post racks.
  • The data center power is DC.
  • The distance between networking racks and server racks is less than 4 m.
  • The cold aisle is at the front of the rack.

You received a BoM containing these parts:

  • 4 x JL635A - HPE Aruba Networking 8325-48Y8C 48-port 25G SFP/SFP+/SFP28 and 8-port 100G QSFP+/QSFP28 switch
  • 24 x JL628A - FB fan
  • 8 x JL861A - 850W 48VDC power supply
  • 4 x JL483C - 4-post Rack Kit
  • 192 x HPE Aruba Networking 10G SFP+ to SFP+ 7m Direct Attach Copper cable.

Which part needs to be changed to allow installation in the customer data center?

Explanation

JL483C is an HPE Aruba Networking X474 4-post rack kit. The specified environment has 2-post racks, so this kit is incompatible and must be replaced with suitable two-post mounting hardware. The Aruba 8325 installation guide separately documents two-post mounting and identifies JL483C as the four-post mounting option.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!