QuestionQ25

VerifiedSwitching

A large multinational financial institution has hired you to design a new full-stack wired and wireless network for its new six-story regional office building. The facility’s bottom two floors will be retail space for a large banking branch. The upper floors will be carpeted corporate office space, with each floor approximately 100,000 sq ft (9290 sq m). All data centers are offsite and outside this project’s scope. The customer is underserved by its existing L2-based network infrastructure and wants to adopt modern best practices in the new design. The network must be fully resilient and fault tolerant, with dynamic segmentation at the edge.

The retail space will provide public guest Wi-Fi access. Retail associates will use corporate tablets for customer service, and the retail floors will contain a mix of wired and wireless devices. Corporate users will primarily connect wirelessly, although several wired clients, printers, and hard VoIP phones will also be used.

The customer also plans to renovate the corporate office space to take advantage of ‘smart office’ technology. These upgrades will enable blue-dot wayfinding, presence analytics, and other location-based services.

The client has decided to manage two wiring closets as a single stack totaling 10 switches, with a minimum transport speed of 25Gbps over OM4 MM fiber. They also want to minimize stacking-cabling costs.

Which stacking components are required to meet the customer’s requirements most cost-effectively when the closets are 190 m (620 ft) apart?

Choose two
Explanation

A 25G VSF design satisfies the minimum transport requirement at lower cost than 50G, and all VSF links in a stack must operate at the same speed. Short in-closet links can use low-cost 25G DAC cables. The 190 m OM4 connection between closets requires 25G SFP28 optical transceivers; the Aruba 25G eSR SFP28 multimode transceiver supports up to 400 m on OM4 fiber. Standard 25G DAC cables are limited to a few metres and cannot span the closets.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!