QuestionQ81

Verified4. Troubleshoot, operate, and maintain HPE Aruba Networking solutions.

The following configuration is present on a Core-1 HPE Aruba Networking CX switch for primary and secondary ISP connectivity:

Core-l(config)# ip route 0.0.0.0/0 10.1.251.2  
Core-l(config)# ip route 0.0.0.0/0 10.1.252.2 distance 10  

The default route through 10.1.251.2 stopped functioning, but failover did not occur. The ISP reported a fiber break in the path to an upstream device.

Under what condition should routing fail over to the 10.1.252.2 router?

Explanation

The static default route through 10.1.251.2 has the lower administrative distance and remains preferred while it is installed in the routing table. The route through 10.1.252.2, with administrative distance 10, takes over only when the preferred route is no longer present. BFD would require explicit configuration on the static route and is not configured here.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!