A newly connected 500R-series access point is not displayed in HPE Aruba Networking Central. You have run the following troubleshooting commands:
Based on the output, what could be the issue?
The AP has the IPv4 link-local management address 169.254.2.58, which shows that it did not receive a usable DHCP address. Aruba documents that APs use DHCP to obtain IPv4 configuration and self-assign an address in the 169.254 subnet when DHCP service is unavailable and no static address is configured. Because VLAN 10 has a DHCP relay configured, the DHCP server can be in a different subnet; the likely issue is that it is unavailable or not responding.
169.254.2.58
169.254
Community Discussion