You are talking to a prospective customer at a medium-to-large enterprise firm about an upcoming storage refresh project they have for their legacy architecture storage platforms. The customer mentions that as they grew the size and types of workloads on their present storage arrays, they became slower in terms of IOPS and throughput. In a few cases, they had to purchase additional arrays to off-load some of the workload. They noticed the same impact to performance when they enabled array-based replication.
Which HPE 3PAR StoreServ architecture feature would solve these issues?
AThe HPE 3PAR StoreServ storage array is an ideal high availability platform that runs its OS in a single instance.
BThe shared links between the controller node and each of the other nodes operates at 4 GB/s full duplex to adequately support the clustering of controller nodes and movement of data between nodes.
CThe HPE 3PAR ASIC offloads IO workload performed by microprocessors in legacy storage array platforms.
DThe HPE StoreServ storage array uses a high-speed, full-mesh active interconnect to join multiple controller nodes together to form a cache-coherent cluster
Which tool should you use to quickly determine HPE 3PAR StoreServ health and performance?
A3PAR CLI
BSSMC
CCMC
DCommand View 3PAR
A customer with multiple Oracle databases in their environment reports that users are experiencing slow application response time. You need to create an optimized solution for this customer. You monitored database performance using Oracle AWR, server, and storage performance monitoring. This revealed that there is a high I/O wait and the average I/O latency is ~30 ms, which is causing slow response times.
Which solution should you propose to address the performance problem?
AHPE 3PAR storage array with high performance spinning disks with HPE 16 Gb/s StoreFabric.
BHPE 3PARall-flash storage array with HPE 16 Gb/s StoreFabric.
CHPE 3PARStorage Array with a sufficient number of spinning disks with HPE 16 Gb/s StoreFabric.
DHPE 3PARhybrid storage Array with spinning disks, Adaptive Flash Cache, and AO with HPE 16 Gb/s StoreFabric.
You are designing a solution containing HPE 3PAR storage for your customer. The customers business is experiencing significant growth, which requires them to invest in a highly-available storage solution. The customer has already invested in two separate data centers but cannot initially afford to purchase two systems.
The solution must be able to provide complete local hardware redundancy. In the near future, the solution will be expanded to be geographically independent, and storage systems will be located in both data centers.
Which HPE 3PAR StoreServ storage system feature could be an essential advantage to this customers business case?
AAllHPE 3PARstorage system models with an identical number of controller nodes can replicate data with each other and provide transparent failover of access to data between data centers.
BOnly currentHPE 3PARstorage system models can replicate data with each other and provide transparent failover of access to data when the number of controller nodes is identical when RMC-V is used.
COnlyHPE 3PARstorage systems with Peer Persistence licenses can replicate data with each other and provide transparent failover of access to data, independent of the number of controller node per storage systems.
DAll currentHPE 3PARstorage system models can replicate data with each other and provide transparent failover of access to data between data centers.
Question 6
Architecting Multi-Site HPE Storage Solutions
0
Question 7
Architecting Multi-Site HPE Storage Solutions
Question 8
Architecting Multi-Site HPE Storage Solutions
Question 9
Architecting Multi-Site HPE Storage Solutions
Question 10
Architecting Multi-Site HPE Storage Solutions
Question 11
Architecting Multi-Site HPE Storage Solutions
Question 12
Architecting Multi-Site HPE Storage Solutions
Question 13
Architecting Multi-Site HPE Storage Solutions
Question 14
Architecting Multi-Site HPE Storage Solutions
Question 15
Architecting Multi-Site HPE Storage Solutions
Question 16
Architecting Multi-Site HPE Storage Solutions
Question 17
Architecting Multi-Site HPE Storage Solutions
Question 18
Architecting Multi-Site HPE Storage Solutions
Question 19
Architecting Multi-Site HPE Storage Solutions
Question 20
Architecting Multi-Site HPE Storage Solutions
Question 21
Architecting Multi-Site HPE Storage Solutions
Question 22
Architecting Multi-Site HPE Storage Solutions
Question 23
Architecting Multi-Site HPE Storage Solutions
Question 24
Architecting Multi-Site HPE Storage Solutions
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ad
Want a break from the ads?
Become a Supporter and enjoy a completely ad-free experience, plus unlock Learn Mode, Exam Mode, AstroTutor AI, and more.
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
During a presentation of an HPE 3PAR StoreServ asynchronous replication design, a company administrator asks about a possible benefit of the Inter Volume
Group Fast Resync functionality in the proposed design.
What are the expected benefits you should discuss? (Select two.)
Afaster resynchronization of volume groups after volume moves
Befficient bandwidth utilization of their links between the sites
Cgreater flexibility when volumes need to be moved between volume groups
Dshort Quiet period waits after moving a volume(s) between volume groups
Elow impact on Remote Copy performance after volume moves between groups
Which functionality is provided by an HPE StoreVirtual Multi-site SAN when loss of a site causes loss of quorum in the management group?
AThe quorum can be recovered manually.
BThe FOM at the DR site will take over automatically.
CThe quorum will failover automatically.
DThe CMC can be used to recover quorum.
Which resource can be used to verify storage system support when using HPE FlexFabric 5900CP switches in a solution design?
AHPE SAN Design Guide
BHPE QuickSpecs
CHPE Backup, Recovery, and Archive (BURA) Solutions design guide
DHPE Single Point of Connectivity Knowledge
HOTSPOT -
Your customer needs highest performance and moderate availability in their HPE StoreVirtual solution.
Click on the Network RAID you should recommend.
Hot Area:
When comparing competitor solutions with your HPE 3PAR StoreServ solution design, which features should you compare?
Atechnology, strengths, threats
Bfixed cache, services, cost
Ccost, complexity, openness
Dmesh architecture, ASIC, manageability
You are presenting an HPE 3PAR StoreServ 8450 all-flash solution to a customers C-level management. Which HPE 3PAR technologies should you focus on to convince the CIO that your proposed solution is more cost-efficient than competitive products? (Select two.)
Aexpress writes
Bthin deduplication
Cvirtual copy
Dvirtual domains
Eadaptive sparing
Which HPE 3PAR StoreServ feature allows stretch clusters that support host capability ALUA to survive the failure of a primary storage array?
APeer Persistence
BPeer Mobility
CPeer Motion
DPeer Management
A customer has a multi-site environment and plans to consolidate file-and-block-level data. A Proof-of-Concept is arranged to familiarize the customer with HPE
3PAR StoreServ File Persona functionality.
Which statement is true when failing over file-level data between the arrays?
AA second cluster IPmust be configured as a DNS alias for the file shares running on theHPE 3PARStoreServ
BAn automated failback is initiated once the primary storage system comes back online.
CThe clients will need to reconnect to NAS shares once failover is complete.
DThe Peer Persistence Arbitrator needs to register the file shares before a failover is initiated.
What must be considered when using Jumbo Frames in an iSCSI SAN environment?
AOnly the network switches in the iSCSI network path will need to have Jumbo Frames enabled.
BAll devices in the iSCSI network path must have Jumbo Frames enabled.
CJumbo Frames are not recommended in an iSCSI environment with multiple network switches.
DJumbo Frames are only supported on 1 Gb Ethernet networks.
You size a Remote Copy solution for an HPE StoreServ customer. Which best practice should be implemented concerning Virtual Volumes (VVs)?
AAll VVs should be spread evenly across all available Remote Copy groups.
BAll VVs should be put into their own Remote Copy group.
CAll VVs belonging to the same application should be added to different Remote Copy groups.
DAll VVs belonging to the same application should be added to the same Remote Copy group.
A customer must store backup data at a separate site from the companys main data center due to governmental regulations. The customer also needs to have rapid restores and short-term retention.
Which solution allows the customer to do local backups and restores, and archive data off site for the long term?
AHPE StoreOnce Recovery manager
BHPE StoreVirtual VSA solution
CHPE StoreOnce backup solution
DHPE StoreEasy
A customer acquired an HPE 3PAR all-flash array to accelerate their databases. They are currently using synchronous replication, but it is causing slow I/O due to limited network bandwidth and latency, both of which cause application slowdown.
Which alternative solution should you propose to address the issue?
APeer Persistence
BPeriodic Asynchronous Remote Copy
CSynchronous Long Distance Remote Copy
DAsynchronous Streaming Remote Copy
Your customer is using the HPE StoreOnce Recovery Manager Central (RMC) software in their environment and wants to implement the Express Protect feature.
What is required to enable this?
Aan HP StoreOnce Enterprise Manager license
Ban HPE StoreOnce Catalyst license.
CExpress Protect, which is included in the HPE StoreOnce RMC
Dan HPE StoreOnce Replication license
HOTSPOT -
The exhibit shows the 4 types of StoreVirtual Network RAID: 0, 10, 10+1 and 10+2. A customer has three sites and needs a copy of data at each site. Click on the
Network RAID level that you should recommend.
Hot Area:
What happens during the fabric login (FLOGI) during the Fibre Channel registration process? (Select two.)
AService parameters are exchanged.
BConnections between N-Ports are established.
CE_Port FC_IDs are assigned.
DBuffer-to-buffer credits are initiated.
EF_Port error counters are cleared.
Your customer has been using HPE Data Protector targeting an HPE StoreOnce with VTL replication, but they have concerns that Data Protector does not automatically know about the replicated tapes. You need to design a PoC for the customer to address this limitation. What should you do to supply this functionality?
AUse HPE StoreOnce Catalyst Copy.
BUpdate the HPE StoreOnce Firmware to the latest level.
CUpgrade HPE Data Protector to Version 9 or higher.
DUse HPE Data Protector Automated Replication Synchronization.
A customer has a multi-site, 10-node HPE StoreVirtual solution. What should be configured to ensure that application servers connect to storage systems located in the same site to get their data?
APeer Persistence
BI/O path preferencing
Csynchronous replication
DDSM MPIO
You are proposing an HPE 3PAR StoreServ solution to a customer who contacted you because of complaints received about the scalability of the companys current solution. The customer has concerns about implementing a new platform from a different vendor and the costs for professional services.
What should you mention to the customer to address this concern?
Ahardware-assisted data migration
BThin Provisioning
CThis Persistence
Dsupport for SATA drives
Your customer wants to lower operational costs by automating Brocade SAN Fabric Zoning to their HPE 3PAR StoreServ array. Which HPE tools can do this for your customer? (Select two.)