A customers backup process exceeds their given backup windows. You propose to modify the backup process, but the customer is concerned about changing it from a full to an incremental architecture because of operational overhead during restore operations.
What should you propose instead?
AImplement snapshots.
BImplement a differential backup scheme.
CEnable archiving.
DLower the daily change rate of the data.
0
Question 2
Designing HPE Backup Solutions
0
Question 3
Designing HPE Backup Solutions
0
Question 4
Designing HPE Backup Solutions
0
Question 5
Designing HPE Backup Solutions
0
That's the end of the Preview
This exam has 50 community-verified practice questions. Create a free account to access all questions, comments, and explanations.
Refer to the exhibit. Which type of HPE Backup and Archive configuration is displayed?
AHPE 3PAR File Persona Share backup
BHPE 3PAR File Persona Software NDMP backup
CVeeam backup to HPE StoreOnce with tape offload
DHPE StoreOnce Recovery Manager Central
A customer has a 5.5 TB database that requires some analysis by a third-party database consultant. The third partys backup software is incompatible with the customers.
Which HPE utility enables the customer to provide the database to the consultant for analysis purposes, as required?
AHPE Library and Tape tools
BHPE StoreEver
CHPE StoreOnce
DHPE StoreOpen
You are designing an upgrade of an MSL 4048 running LTO-5 drives to LTO-6 remotely. Due to security reasons, the MSL library is not connected to the Ethernet network. You need to identify the current firmware versions of library and drives.
How can you accomplish this?
ASet the IP of the MSL Library using the Configuration tab and verify firmware levels using MSLinfo.
BUse the info tab of the MSL front panel to identify firmware levels of library and drives.
CUse the web interface of the MSL library to obtain the information.
DInstall HPE Library and Tape tools and the backup server and verify firmware levels.
Which advantage does the HPE StoreOnce Backup System have over traditional, tape-style backup solutions?
AIt uses FCoE technology.
BIt is less costly than tape solutions.
CIt uses disk-based storage.
DIt uses a virtual base appliance.
Question 6
Designing HPE Backup Solutions
0
Question 7
Designing HPE Backup Solutions
Question 8
Designing HPE Backup Solutions
Question 9
Designing HPE Backup Solutions
Question 10
Designing HPE Backup Solutions
Question 11
Designing HPE Backup Solutions
Question 12
Designing HPE Backup Solutions
Question 13
Designing HPE Backup Solutions
Question 14
Designing HPE Backup Solutions
Question 15
Designing HPE Backup Solutions
Question 16
Designing HPE Backup Solutions
Question 17
Designing HPE Backup Solutions
Question 18
Designing HPE Backup Solutions
Question 19
Designing HPE Backup Solutions
Question 20
Designing HPE Backup Solutions
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ad
Want a break from the ads?
Become a Supporter and enjoy a completely ad-free experience, plus unlock Learn Mode, Exam Mode, AstroTutor AI, and more.
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
What is an advantage of server-side deduplication over target-side deduplication with HPE StoreOnce?
AIt is supported on NAS and Catalyst Stores.
BIt only does deduplication at the first backup.
CIt reduces bandwidth between the server and target HPE StoreOnce.
DIt allows the target HPE StoreOnce not to have a hash table.
Which backup method has all computers and their local disk volumes backing up to one or more central services with attached backup devices?
Alocal server
Bclient/server
Cpush agents
Dserver based
You obtain the XML files from Ninja Protect after a backup assessment from a customer.
What should you do next to finalize the design and to get a bill of material (BOM)?
AOpen the XML in the quoter of SalesBuilder for Widows.
BUpload the XML file into Unison.
CImport the files in the HPE Storage Sizing tool.
DSend the XML file to an HPE sales representative to generate the BOM.
A customer is concerned about backup performance of their virtual environment.
What should you implement in the solution design to implementation plan?
AMap the proposed Fibre Channel tape library to each VMware vSphere host to perform SAN backups.
BIntegrate the use of the VMware API for Data Protection to centralize virtual machine backups.
CAllocate additional vCPUs to each virtual machine to reduce backup overhead.
DAdd additional hard drives in each Hypervisor server to optimize backup-to-disk performance and reduce latencies.
You are designing a proof-of-concept for a new customer for remote site backup using HPE 3PAR StoreServ to an HPE StoreEver tape library. The customer asks how the data would flow with using snapshots at the far side to do the backup.
What is the most efficient way to set this up?
AUse HPE StoreOnce Express Protect Backup to copy the snapshot to the HPE StoreEver tape library.
BMount the snapshot to a DR server and back up to the HPE StoreEver tape library.
CDirectly back up the snapshot to the HPE StoreEver tape library from the HPE 3PAR StoreServ.
DCopy the snapshot data to the HPE StoreEver tape library using the LTFS functionally.
A customer needs to offload disk VO caused try nightly backups from their production HPE 3PAR StoreServ Disk Array,
They have two other HPE 3PAR Disk Arrays. One is located at their disaster recovery (DR) site located 300 km away, and the other is used for their Test/Dev environment located in the same datacenter.
What should you recommend to accomplish this? (Choose two.)
ASet up HPE 3PAR enhanced asynchronous replication between the production and DR disk arrays.
BCreate a snapshot of the replicated volumes on the Test/Dev array and present to the backup system.
CSet up HPE 3PAR synchronous replication between the production and Test/Dev disk arrays.
DCreate a snapshot of the replicated volumes on the production array and present to the backup system,
ESet up HPE 3PAR synchronous replication between the production and DR disk arrays.
A customer with a LAN/SAN environment is considering HPE 3PAR for an upcoming storage refresh, but has a tight budget. The customer needs 200 TB of Fibre
Channel-attached, very low latency, block-storage for application servers, and 10 TB of LAN-attached storage for end-user file/file shares for about 100 end-users.
They want to use as much of their existing systems as possible and would like to continue using the ISV back-up system installed last year to back up the block- based and file/file share data and files, respectively.
The customer sees a presentation that includes details on the HPE 3PAR File Persona features and they like the idea of consolidating their Fibre Channel and
LAN-based storage onto one storage platform. You deliver technical presentations on me HPE StoreOnce and StoreEver backup offerings. The customer asks for an HPE 3PAR solution proposal that includes provisions for backup-to-local disk and tape of all SAN-attached data, and minimal backup-to-disk for all LAN- attached data.
Your sales team is proposing a combined HPE 3PAR StorServ 8000, HPE StoreOnce Backup System, and HPE StoreEver solution and is working on the HPE
3PAR configuration. You are developing the proposals for the HPE StoreOnce and HPE StoreEver configurations. While analyzing ways to reduce costs, you determine that the customer's backup windows are achievable with either their Fibre Channel SAN or Ethernet environment.
Which additional information should you obtain to enable you to recommend the most cost-effective solution?
ADoes the customer’s ISV Backup System support NDMP?
BHow much power and floor/rack space will me new proposed solution require?
CDoes the customer’s ISV Backup System support iSCSI?
DWhat is the skill level of the backup administrators?
A customer has two sites that are 100 miles (160 km) apart. Each site is 100 percent virtualized and has identical storage and server infrastructures, running active/active environments with array based replication. The customer needs a solution that enables them to recover either site with minimal input from their IT teams, while meeting their two hour RTO and 15 minute RPO SLAs.
What should you recommend to improve this customers current infrastructure?
AVMware vCenter Operations Manager
BVMware vRealize automation
CHPE 3PAR Remote Copy Software
DVMware Site Recovery Manager
A customer is using HPE StoreOnce VSA as a NAS target in a remote office backup architecture.
Which feature allows the customer to perform a deduplication-optimized copy to the central office?
Ahash-based
Bremote snapshots
Clow bandwidth replication
Dcatalyst-based replication
What should be used to update firmware on an HPE StoreEver tape library?
AHPE Library and Tape tools
BHPE Smart Update Manager
CHPE OneView
DHPE Support Pack for ProLiant
During restore, what is an advantage of having performed a full backup versus an image backup?
AIt restores an exact copy of the data on the disk.
DRestoring a full backup will defragment the backed up files.
What must be a part of a company’s backup and data protection strategy?
Aan active archive and data analytics plan
Ba TCO analysis and ROI plan
Cbackup to disk to tape implementation
Dphysical protection of the backed up data
A customer wants to protect a VMware environment using HPE 3PAR snapshots backed up to HP StoreOnce.
Which product should you demonstrate?
AHPE StoreOnce Recovery Manager Central
BHPE 3PAR StoreServ Management Console
CHPE 3PAR Management Console
DHPE StoreOnce Catalyst
When zoning by HBA port in large SAN infrastructures, which feature is a benefit?
Aserver-side duplication
Bsimplified device discovery
Cprevention of zone overlapping
DSAN attached storage backups
A customer has an HPE StoreOnce 4500 with a single VTL with eight tape drives. During the backup cycle, they experience errors where are no devices available.
Which actions allow for more devices to be available to the backup server? (Choose two.)
AUpgrade to the HPE StoreOnce 4900.
BAdd more tape drives in the HPE StoreOnce VTL currently in use.
CAdd more storage to the HPE StoreOnce 4500.
DCreate more VTLs and tape drives to allow for more backup devices.