What is the maximum number of Bricks and drives that can be configured in a VMAX 950?
A8 Bricks and 288 drives
B2 Bricks and 96 drives
C8 Bricks and 1920 drives
D2 Bricks and 100 drives
0
Question 2
Unisphere for PowerMax
0
Question 3
Virtualized Environments
0
Question 4
Design and Sizing for PowerMax and VMAX All Flash
0
Question 5
Replication
0
That's the end of the Preview
This exam has 60 community-verified practice questions. Create a free account to access all questions, comments, and explanations.
Topics covered:
PowerMax and VMAX All Flash FeaturesBusiness ContinuityReplicationVirtualized EnvironmentsDesign and Sizing for PowerMax and VMAX All FlashUnisphere for PowerMax
A storage architect is designing a PowerMax solution. The architect must ensure that the Unisphere server is not directly connected to the arrays.
Which type of Unisphere for PowerMax deployment will achieve the design requirements?
ACloudIQ
BLocal Configuration
CRemote Configuration
DeManagement
A storage administrator has mounted a snapshot of an existing datastore to the ESXi server and decided to keep its existing signature. What action is prevented by keeping the existing signature?
AModifying the datastore configuration
BRestoring the datastore
CReplicating the datastore
DIncreasing the datastore size
A very small data center is being deployed at a service provider site. New 32 GB FC switches to support Open Systems hosts have been purchased and installed in the data center. Two of the tenants for data storage are from competing small businesses. Data storage for each tenant is expected to be a maximum of 500 TB. Because tenants are from competing companies, the service provider wants to be able to provide data storage from different arrays to each tenant to guarantee separation of data and information.
Which array is recommended to support these requirements, while occupying the least amount of space in the new data center?
APowerMax 8000
BVMAX All Flash 250
CVMAX All Flash 950
DPowerMax 2000
A data migration is being planned from a Hitachi to a PowerMax using Open Replicator. Which flag is used to protect against SAN failure?
ABackground Copy
BDonor Update
CCopy on Access
DHot Push
Question 6
Replication
0
Question 7
Unisphere for PowerMax
Question 8
Replication
Question 9
PowerMax and VMAX All Flash Features
Question 10
Unisphere for PowerMax
Question 11
Unisphere for PowerMax
Question 12
PowerMax and VMAX All Flash Features
Question 13
Design and Sizing for PowerMax and VMAX All Flash
Question 14
Business Continuity
Question 15
Business Continuity
Question 16
PowerMax and VMAX All Flash Features
Question 17
Replication
Question 18
Unisphere for PowerMax
Question 19
PowerMax and VMAX All Flash Features
Question 20
PowerMax and VMAX All Flash Features
Question 21
Replication
Question 22
Business Continuity
Question 23
Unisphere for PowerMax
Question 24
Design and Sizing for PowerMax and VMAX All Flash
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ad
Want a break from the ads?
Become a Supporter and enjoy a completely ad-free experience, plus unlock Learn Mode, Exam Mode, AstroTutor AI, and more.
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
Ask AstroTutor
0
How do Copy mode linked targets and NoCopy mode linked targets behave when a SnapVX unlink operation disassociates the linked target?
AOnce the copy completes, Copy mode linked targets do not contain a full and usable copy of the source devices.Behavior of NoCopy mode linked targets depends on the operating system running on the array. PowerMaxOS 5978 and HYPERMAX OS 5977.810.184 and later allow access to unlinked targets.
BOnce the copy completes, Copy mode linked targets contain a full and usable copy of the source devices.Behavior of NoCopy mode linked targets depends on the operating system running on the array. PowerMaxOS 5978 and HYPERMAX OS 5977.596.583 and later allow access to unlinked targets.
COnce the copy completes, Copy mode linked targets contain a full and usable copy of the source devices.Behavior of NoCopy mode linked targets depends on the operating system running on the array. PowerMaxOS 5978 and HYPERMAX OS 5977.810.184 and later allow access to unlinked targets.
DOnce the copy completes, Copy mode linked targets will contain a full and usable copy of the source devices.NoCopy mode linked targets will not allow access to unlinked targets.
Which storage object must be created in Unisphere for PowerMax so that vCenter can automatically provision datastores to ESXi hosts?
AStorage Groups
BStorage Volumes
CMasking View
DHost Groups
A customer is planning to implement SRDF/Metro, using the default Device Bias method. What is a consideration?
ABias cannot be changes in the SRDF/Metro group.
BThis setting applies to all SRDF groups in both arrays.
CThere is no way to make the R2 device available to the host.
DThe state of the device pair is ActiveActive.
A storage administrator is unable to terminate the TimeFinder SnapVX snapshot. What action should be performed by the administrator?
AModify the Time to Live setting
BVerify that there are no linked targets or restore sessions
CRun a terminate command for each individual LUN
DCheck if there is an available reserved capacity
A storage architect is planning a Unisphere upgrade. Which password is required for the upgrade?
Alockbox
Broot
Csysadmin
Dboxmgmt
What provides a quick representation of the performance metrics of a Storage Group and details the relationship between it and the associated front-end director and ports?
APerformance Thresholds
BSG Noisy Neighbor
CSG Workload
DIO Profile
A PowerMax Storage Group has Host I/O limits set at 10000 IOPS. The Port Group contains four ports across different directors. The Dynamic Distribution is set to OnFailure.
What is the maximum IOPS the Storage Group can achieve in the event a switch port being used by one of the director ports fails but the director remains online?
A2500
B5000
C7500
D10000
A storage administrator is provisioning storage on a PowerMax 2000 array. The application requires fast reads and the highest possible data protection.
Which RAID level should be recommended?
ARAID 6 (6 + 2)
BRAID 5 (3 + 1)
CRAID 6 (14 + 2)
DRAID 5 (7 + 1)
An architect uses the following command to collect data from a HP-UX host when designing a solution in BCSD: sar –d –b interval count >> hostname.sar.date.txt
What does the –b flag in the command represent?
ABlock
BBinary
CBreak
DBuffer
A customer is planning to purchase a PowerMax 8000 system with the zEssentials software package. The environment needs to have the ability to rapidly recover from large scale logical corruption using TimeFinder SnapVX.
Which optional software should be recommended to fulfill the requirement?
AProduct Suite for z/TPF
BGDPR
CzDP
DAutoSwap
Which deduplication methods are supported for VMAX All Flash?
ADEFLATE Compression algorithm, Inline Deduplication, and FBA Storage Resource Pool
BAdaptive Compression Engine, CKD Storage Resource Pool, and Compression I/O module
CAdaptive Compression Engine, Compression I/O module, and LZS Compression algorithm
DExtended Data Compression, Inline Deduplication, and LZS Compression algorithm
Which SRDF/A resiliency feature allows sessions to remain active during transient link outages?
AGroup-Level Write Pacing
BTransmit Idle
CRecovery After Link Loss
DFailback
Which view of the Unisphere for PowerMax user interface can an architect go to for a heatmap?
ASelected System > System
BAll Systems > Performance
CAll Systems > Databases
DSelected System > Dashboard
What is required before a port can be disassociated from an FA emulation on a PowerMax?
AThe port must not be a member of any Port Group
BThe port must not belong to an RDF group
CAll ports on the I/O module must be offline
DAll ports associated with the FA emulation must be offline
What is the maximum number of front-end ports that can be configured on a PowerMax 8000?
A128
B192
C256
D320
DRAG DROP -
Match each SRDF command with its function.
What is a Composite Group in BCSD?
ACollection of SRDF physical relationships
BCollection of SRDF logical relationships
CCollection of MSC physical relationships
DCollection of Replication Groups
The SecurityAdmin for Unisphere wants to create a new user that will perform all management (active or control) operations on a storage system and be able to modify GNS group definitions in addition to all Monitor operations. The user will not be able to create or delete user accounts.
What role needs to be assigned to the new user?
AStorageAdmin
BDevice Management
CAdmin
DSecurityAdmin
A PowerMax parent Storage Group (SG) contains two child SGs: SG1 and SG2. What is a valid Host I/O limit setting for this configuration?