QuestionQ124

VerifiedNetwork Troubleshooting

A network administrator needs to connect a multimode fiber cable from the MDF to the server room. The administrator connects the cable to Switch 2, but there is no link light. The administrator tests the fiber and finds it does not have any issues. Swapping the connection to Switch 1 in a working port is successful, but the swapped connection does not work on Switch 2. Which of the following should the administrator verify next?

Explanation

Since the tested fiber cable works on Switch 1 but fails on Switch 2, and moving the cable between ports doesn't resolve the issue, the problem is specific to Switch 2. The most likely cause is an incompatible or faulty transceiver in Switch 2 that does not support the cable's specifications or is misconfigured. Fiber length, connector type, and port speed would affect all connections through the port equally.

Community Discussion

No comments yet. Be the first to start the discussion!