Free preview mode
Enjoy the free questions and consider upgrading to gain full access!
350-801
Free trial
Verified
Question 76
Which issue causes slips on a PRI?
- A: incorrect clock source
- B: incorrect encapsulation
- C: incorrectly configured time zone
- D: change in the line code
Question 77
Multiple route patterns match a number. How does Cisco Unified Communications Managers determine which pattern to use?
- A: the one that comes first in numerical order
- B: the one with the longest match
- C: the one with the closest match
- D: the one that discards everything PreDot
Question 78
Which action prevents toll fraud in Cisco UCM?
- A: Implement toll fraud restriction in the Cisco IOS router.
- B: Implement route patterns in Cisco UCM.
- C: Allow off-net to off-net transfers.
- D: Configure ad hoc conference restriction.
Question 79
A user forwards a corporate number to an international number. What are two methods to prevent this forwarded call? (Choose two.)
- A: Set the Call Classification to OnNet for the international route pattern.
- B: Block international dial patterns in the SIP trunk CSS.
- C: Configure a Forced Authorization Code on the international route pattern.
- D: Set Call Forward All CSS to restrict international dial patterns.
- E: Check Route Next Hop By Calling Party Number on the international route pattern.
Question 80
Calls are being delivered to the end user in the globalized format. Where does an engineer configure the calling number into a localized format?
- A: route pattern
- B: service parameters
- C: IP phone
- D: gateway
Question 81
Which method is used to avoid toll fraud with Cisco Unified Communications Manager calls?
- A: call policy service
- B: TOLLFRAUD_APP
- C: default zone access rules
- D: class of service
Question 82
Which two configuration elements are part of the Cisco Unified Communications Manager toll-fraud prevention? (Choose two.)
- A: SIP trunk security profile
- B: Calling Search Space
- C: SUBSCRIBE Calling Search Space
- D: feature control policy
- E: partition
Question 83
How are E.164 called-party numbers normalized on a globalized call-routing environment in Cisco Unified Communications Manager?
- A: Normalization is achieved by stripping or translating the called numbers to internally used directory numbers.
- B: Normalization is achieved by setting up calling search spaces and partitions at the SIP trunks for PSTN connection.
- C: Call ingress must be normalized before the call being routed.
- D: Normalization is not required.
Question 84
Which Cisco UCM feature is used to determine the maximum bit rate for a call between two video endpoints?
- A: partitions
- B: locations
- C: regions
- D: transformations
Question 85
Which feature is enabled by Cisco Mobile and Remote Access?
- A: Internal SIP clients registered to Cisco UCM can call external companies
- B: Clients such as Cisco Jabber can use call control on Cisco UCM
- C: VPN connectivity can be established to Cisco UCM
- D: Cisco UCC Express clients can obtain VPN connectivity to Cisco UCC Enterprise
Question 86
An administrator recently upgraded a Cisco Webex DX80 through its web interface but discovered the next morning that the unit has received to its previous version. What must the administrator do to prevent this from happening again?
- A: Assign a phone security profile with secure SIP.
- B: Set the prepare cluster for rollback to pre-8.0 enterprise parameter to true.
- C: Confirm the phone load name in the phone configuration.
- D: Assign a universal device template to the phone.
Question 87
What dialed numbers match this Cisco UCM route pattern?
1[23]XX
- A: 1200 through 1300 only
- B: 12300 through 12399 only
- C: 1200 through 1399 only
- D: 1230 through 1239 only
Question 88
Cisco UCM delays routing of a call during digit analysis with an overlapping dial plan. How long is the default wait time?
- A: 5 seconds
- B: 10 seconds
- C: 15 seconds
- D: 20 seconds
Question 89
An administrator is asked to implement toll fraud prevention in Cisco UCM, specifically to restrict off-net to off-net call transfers. How is this implemented?
- A: Use the correct route filters.
- B: Implement time-of-day routing.
- C: Enforce ad-hoc conference restrictions.
- D: Set the appropriate service parameter.
Question 90
Which call flow matches traffic from a Mobile and Remote Access registered endpoint to central call control?
- A: Endpoint > Expressway-E > Expressway-C > Cisco Unified CM
- B: Endpoint > Expressway-E > Cisco Unified CM
- C: Endpoint > Expressway-C > Cisco Unified CM
- D: Endpoint > Expressway-C > Expressway-E > Cisco Unified CM
Question 91
How does Cisco Unified Communications Manager perform a digit analysis on-hook versus off-hook for an outbound call from a Cisco IP phone that is registered to Cisco Unified CM?
- A: On-hook, Unified CM performs a digit-by-digit analysis; off-hook, Unified CM considers all digits were dialed and does not wait for additional digits.
- B: On-hook, Unified CM considers all digits were dialed and does not wait for additional digits; off-hook, Unified CM performs a digit-by-digit analysis.
- C: On-hook, by pressing the digits and entering "#" to process the call, Unified CM performs a digit-by-digit analysis; off-hook, Unified CM analyzes all digits as a string.
- D: On-hook, no digit analysis is performed; off-hook, Unified CM requires the ג€#* to start the digit analysis.
Question 92
How does an administrator make a Cisco IP phone display the last 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?
- A: Configure a translation pattern that has a Calling Party Transform Mask of XXXXXXXXXX.
- B: On the inbound SIP trunk, change Significant Digits to 10.
- C: Change the service parameter Apply Transformations On Remote Number to True.
- D: Configure a calling party transformation pattern that keeps only the last 10 digits.
Question 93
Which endpoint feature is supported using Mobile and Remote Access through Cisco Expressway?
- A: SRST
- B: SSO
- C: H.323 registration proxy to Cisco UCM
- D: MGCP gateway registration
Question 94
When a phone is registered over Mobile and Remote Access, where does it register?
- A: Cisco Unified Presence Server
- B: Expressway-E
- C: Cisco Unified Communications Manager
- D: Expressway-C
Question 95
An engineer is notified that the Cisco TelePresence MX800 that is registered in Cisco Unified Communications Manager shows an empty panel, and the Touch 10 shows a corresponding icon with no action when pressed. Where does the engineer go to remove the inactive custom panel?
- A: The Software Upgrades page in CUCM OS Administration
- B: The In-Room Control Editor on the webpage of the MX800
- C: The phone configuration page in CUCM Administration
- D: The SIP Trunk Security Profile page in CUCM Administration
That’s the end of your free questions
You’ve reached the preview limit for 350-801Consider upgrading to gain full access!
Free preview mode
Enjoy the free questions and consider upgrading to gain full access!