Is this exam completely free?

Examcademy offers a free preview for every exam, covering around 20% of the total questions. Full access is available with a paid upgrade.

Can I practice IT certification exams from Microsoft, AWS, or CompTIA?

Yes! Examcademy supports a wide range of IT certification exams including Microsoft Azure, AWS Cloud Practitioner, and CompTIA A+ and Security+.

How accurate are the mock exams?

Our mock exams are built and reviewed with the help of AI and community contributions, staying aligned with real-world exam objectives.

Free preview mode

Enjoy the free questions and consider upgrading to gain full access!

350-601Free trial

By cisco

Verified

25Q per page

Question 76

DRAG DROP -
Drag and drop the characteristics from the left onto the NAS protocols on the right. Some characteristics are used more than once.
Select and Place:

—

Question 77

DRAG DROP -
Drag and drop the NAS features from the left onto the NAS descriptions on the right. Not all features are used.
Select and Place:

—

Question 78

DRAG DROP -
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop the actions from the left into the order on the right.
Select and Place:

—

Question 79

Refer to the exhibit.

A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch.
What is the destination IP address of the vPC keepalive packets that are sent by the switch?

A: 192.168.254.4
B: 192.168.254.1
C: 192.168.254.2
D: 239.255.70.83

—

Question 80

Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?

A: switch(config-vsan-db)# vsan 100 interface vfc 31
B: switch(config-vsan-db)# vsan 100 fc 3/1
C: switch(config-vsan-db)# vsan 100 bind interface fc 3/1
D: switch(config-vsan-db)# vsan 100 bind interface vfc 31

—

Question 81

Refer to the exhibit. An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)

A: vsan database vsan 10 interface vfc 10
B: interface vfc 10 bind interface ethernet 1/3 no shut
C: vsan database vsan 10 interface ethernet 1/3
D: interface vfc 10 bind interface fcoe-vfc 1/3 no shut
E: interface fcoe 10 bind interface ethernet 1/3 no shut

—

Question 82

Refer to the exhibit. An engineer is configuring a VSAN on the network. Which option must be selected to create the VSAN?

A: Common/Global
B: Fabric B
C: FC Zoning Enabled
D: Fabric A

—

Question 83

An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)

A: MAC addresses
B: WWPN Pool
C: WWNN
D: Fabric ID
E: VLAN ID

—

Question 84

Refer to the exhibit. An engineer configures FCIP on a Cisco MDS 9000 Series switch. What is the result of implementing the configuration?

A: The switch attempts to make two TCP connections.
B: Compression is performed by using hardware.
C: Compression is performed by using software.
D: Mode2 is enabled by default.

—

Question 85

The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders. Which configuration should be applied to an
MDS switch in order to be used as the best switch to connect by the CNAs in the fabric?

A: fcoe fcf-priority 512
B: fcoe fcf-priority 0
C: no fcoe fcf-priority
D: fcoe fcf-priority 1024

—

Question 86

Refer to the exhibit. An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration?

A: Configure switchport speed 4000 under interface fc2/2.
B: Configure the switchport monitor under interface fc2/2.
C: Configure session type fc under monitor session 1.
D: Configure the switchport mode SD under interface fc2/1.
E: Configure the switchport mode SD under interface fc2/2.

—

Question 87

What is a recommended design choice in a topology for multipathing iSCSI traffic?

A: single initiator to dual targets
B: two NICs bonded together on the initiator
C: dual initiators to a single target with bonded interfaces
D: initiators and targets in separate subnets

—

Question 88

Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)

A: disable Cisco Fabric Services
B: check the impact of the upgrade using the show install all impact command
C: free up space on the USB3 device by deleting old Cisco NX-OS image files
D: make the primary supervisor the active supervisor
E: back up the configuration

—

Question 89

Which solution provides remote and direct file-level access to users and systems?

A: direct-attached storage
B: Fibre Channel over Ethernet
C: network-attached storage
D: storage area network

—

Question 90

Due to a major version change, an engineer must perform a software upgrade on a Cisco Nexus Series switch.
Which two technologies should be implemented to reduce disruptions to the network during the upgrade? (Choose two.)

A: vPC
B: HSRP
C: VDC
D: MLAG
E: PAgP

—

Question 91

Which storage protocol reduces file locks by using leasing?

A: SMB
B: NFS 3
C: NFS 4
D: CIFS

—

Question 92

A customer data center is configured for distribution of user roles, call home, and NTP. The data center was split into two geographically separate locations called
DC1 and DC2. The requirement is for the user role configurations to be distributed in DC1 and for NTP and call home features to be constrained to DC2. Which two configuration sets must be used to meet these requirements? (Choose two.)
A.

—

Question 93

Refer to the exhibit. An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails.
Which action accomplishes this objective?

A: Set the pinning max-links value to 8
B: Configure the eight uplinks in a port channel
C: Change the supported FEX type
D: Statically assign each host interface to a fabric uplink

—

Question 94

An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge. What is the result of this action?

A: The upgrade stops
B: The zone merge pauses until the upgrade completes
C: The zone merge stops
D: The zone merge executes and then the upgrade completes

—

Question 95

A network engineer needs to upgrade the EPLDs of the fabric modules for a Cisco MDS director-class switch. In which order are components reloaded during the process?

A: one fabric module at the time
B: all fabric modules followed by the entire switching platform
C: all fabric modules in parallel
D: one module and one supervisor at the time

—

Question 96

What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?

A: EPLD bundles are released separately from a Cisco MDS NX-OS release
B: EPLD packages update hardware functionality on a device
C: EPLD updates are nondisruptive to traffic flow
D: EPLD updates are installed only via the Cisco DCNM GUI

—

Question 97

The EPLD update of the supervisor module has been scheduled for several Cisco MDS 9000 Series Switches. What will be the impact of the update?

A: All traffic is stopped for the duration of the EPLD update and the switch is rebooted after the upgrade is completed.
B: The redundant supervisor takes over while the EPLD update is in progress and the switch is rebooted after the upgrade is completed.
C: All control plane traffic is stopped for the duration of the EPLD update and the switch remains operational for the duration of the upgrade.
D: The redundant supervisor takes over while the EPLD update is in progress and there is no service disruption.

—

Question 98

A network engineer configures a converged network adapter (CNA) and must associate a virtual Fibre Channel 7 interface to VSAN 7. The CNA is connected to the interface Eth1/7, and VLAN 700 is mapped to the VSAN. Which configuration must be applied to create the virtual Fibre Channel interface and associate it with the Ethernet physical interface?

A: switch(config)# interface vfc 7 switch(config-if)# bind interface ethernet 1/7
B: switch(config)# vlan 700 switch(config-vlan)# fcoe vsan 7
C: switch(config)# vsan database switch(config-vsan)# vsan 7 interface vfc 7
D: switch(config)# interface ethernet 1/7 switch(config-if)# vfc 7 attach vlan 1,700

—

Question 99

A company is running a pair of Cisco Nexus 7706 Series Switches as part of a data center segment. All network engineers have restricted read-write access to the core switches. A network engineer must add a new FCoE VLAN to allow traffic from servers toward FCoE storage. Which set of actions must be taken to meet these requirements?

A: 1. Assign the network-admin role to a user. 2. Commit the role to the switch to the active user database.
B: 1. Modify a network-operator role and add the required privileges. 2. Assign a VDC-operator role to a user.
C: 1. Create a user-defined role and add the required privileges. 2. Assign a role to a user.
D: 1. Add the required privilege to the VDC-admin role. 2. Commit the changes to the active user database.

—

Question 100

Which communication method does NFS use for requests between servers and clients?

A: SMB
B: RPC
C: SSC
D: XDR

—

Page 4 of 21 • Questions 76-100 of 524

←

2 3 4 5 6

→

Free preview mode

Enjoy the free questions and consider upgrading to gain full access!