QuestionQ67Verified/IPv6 VPNsCopy linkReport a problemAsk AstroTutorSave questionWhich configuration is required when an engineer deploys MP-BGP to exchange IPv6 routes?ABGP peering must be activated under the IPv6 address family.BThe bgp default ipv4-unicast command must be implemented on each router participating in MP-BGP.CBGP must be deployed in a fully meshed architecture within the autonomous system.DThe participating routers must be configured within the same autonomous systemShow AnswerAnswerExplanationBGP neighbors must be activated under the IPv6 address family to exchange IPv6 prefixes. The IPv6 address-family configuration enables MP-BGP capability for that AFI/SAFI; IPv4-unicast operation is the default otherwise.Learn moreCisco IP Routing Configuration Guide — Multiprotocol BGP Extensions for IPv6Show comments0Show commentsCommunity DiscussionNo comments yet. Be the first to start the discussion!
Community Discussion