QuestionQ70

VerifiedMPLS and Segment Routing

Question Image

Refer to the exhibits. A network operator is troubleshooting packet loss from the R1 loopback interface to the R2 loopback interface over the core network. The operator is attempting to identify the next leg in the path from PE1. Which interface and label path should the operator investigate next?

Explanation

The BGP route for 10.2.2.2/32 has next hop 10.0.0.33. The 10.0.0.32/30 MPLS forwarding entry that reaches this next hop specifies Gi0/0/0/2 as the outgoing interface and 24002 as the outgoing label. In an MPLS forwarding table, the outgoing label is assigned by the downstream next hop, and the outgoing interface is the interface through which labeled packets are sent.

Learn more

Community Discussion

No comments yet. Be the first to start the discussion!