300-410 ENARSI: Implementing Cisco Enterprise Advanced Routing and ServicesDemo

SIMULATION

Guidelines

This lab item requires tasks to be completed on virtual devices.

• Use the Tasks tab to view the tasks for this lab item.
• Use the Topology tab to access device consoles and complete the tasks.
• Console access is available for every required device by selecting its device icon or the tabs above the console window.
• All required preconfigurations are already applied.
• Do not alter the enable password or hostname on any device.
• Do not replace existing routing policies or configurations.
• Save the configuration to NVRAM before proceeding to the next item.
• Select Next at the bottom of the screen to submit the lab and continue to the next question.
• After Next is selected, the lab closes and cannot be reopened.

Topology

Tasks

Configure separate VRFs for each customer according to the topology to meet these goals:

1. VRF “cu-red” has interfaces on routers R1 and R2. Both routers already have IP addressing, VRFs, and BGP configured. Do not use the BGP network statement for advertisement.
2. VRF “cu-green” has interfaces on routers R1 and R2.
3. BGP on router R1 populates VRF routes between router R1 and R2.
4. BGP on router R2 populates VRF routes between router R1 and R2.
5. LAN-to-LAN connectivity works between SW1 and SW3 for VRF “cu-red” and between SW2 and SW4 for VRF “cu-green”. All switches are preconfigured.