QuestionQ8Verified/QoS on a Wireless NetworkCopy linkReport a problemAsk AstroTutorSave questionWhich of the following wireless client specifications helps with designing the size of an AP cell?AThe antenna gainBThe receiver sensitivityCThe number of spatial streamsDThe data rates supportedShow AnswerAnswerExplanationReceiver sensitivity specifies the minimum received signal level at which a client can reliably decode a transmission. AP cell boundaries must provide sufficient signal for the client device—particularly on the client-to-AP link—so this value directly informs coverage-cell sizing. The data rates supported can affect the required signal level for a chosen rate, but receiver sensitivity is the direct client specification used to establish the usable RF boundary.Learn moreReceive Start of Packet (RX-SOP)Wireless High Client Density Design GuideShow comments0Show commentsCommunity DiscussionNo comments yet. Be the first to start the discussion!
Community Discussion